Solid model correction - small job

Post here if you have a FreeCAD-related job to offer to the FreeCAD community. This can include programming or modeling.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
shema
Posts: 3
Joined: Wed Mar 20, 2019 2:32 pm

Solid model correction - small job

Post by shema »

Hello all,

I am looking for someone to perform the correction on the geometry of existing solid model (Parasolid format).

Thanks for responding!
chrisb
Veteran
Posts: 53920
Joined: Tue Mar 17, 2015 9:14 am

Re: Solid model correction - small job

Post by chrisb »

Can you get the model in Step format?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
shema
Posts: 3
Joined: Wed Mar 20, 2019 2:32 pm

Re: Solid model correction - small job

Post by shema »

Yes, I can provide model in STEP format. However, the final output at delivery should be in Parasolid.
chrisb
Veteran
Posts: 53920
Joined: Tue Mar 17, 2015 9:14 am

Re: Solid model correction - small job

Post by chrisb »

FreeCAD cannot write that on its own, so you need someone to convert the final file.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Serchu
Posts: 107
Joined: Tue Feb 10, 2015 12:33 pm
Location: General Pacheco (Buenos Aires) - Argentina
Contact:

Re: Solid model correction - small job

Post by Serchu »

Had been solved the issue?
Post Reply