FEM Workbench aligned to guidelines

A forum for research and development of the user interface of FreeCAD

Moderator: agryson

User avatar
agryson
Posts: 453
Joined: Wed Nov 23, 2016 8:30 am
Location: Paris, France
Contact:

FEM Workbench aligned to guidelines

Post by agryson » Sat Mar 18, 2017 6:24 am

Sorry for the delay, but here are the FEM icons aligned ready for feedback before pull request.
There were a lot of png icons here that needed to be totally recreated as svgs, so that took a while.

As ever, old on left, new on right, at 16, 24, 32 and 64 px respectively on light, gray and dark backgrounds.
spritesheet_A.png
spritesheet_A.png (500.63 KiB) Viewed 1187 times
spritesheet_B.png
spritesheet_B.png (386.2 KiB) Viewed 1187 times
spritesheet_C.png
spritesheet_C.png (489.55 KiB) Viewed 1187 times
Feedback welcome.

User avatar
kkremitzki
Posts: 1708
Joined: Thu Mar 03, 2016 9:52 pm
Location: Texas

Re: FEM Workbench aligned to guidelines

Post by kkremitzki » Sat Mar 18, 2017 6:44 am

Great job! I saw quite a few major improvements, especially on a lot of the thermal stuff.
Like my FreeCAD work? I'd appreciate any level of support via Patreon, Liberapay, or PayPal! Read more about what I do at my blog.

Jee-Bee
Posts: 1950
Joined: Tue Jun 16, 2015 10:32 am
Location: Netherlands

Re: FEM Workbench aligned to guidelines

Post by Jee-Bee » Sat Mar 18, 2017 6:51 am

Wow Didn't know FEM had that amount of icons!!
Creat job

User avatar
agryson
Posts: 453
Joined: Wed Nov 23, 2016 8:30 am
Location: Paris, France
Contact:

Re: FEM Workbench aligned to guidelines

Post by agryson » Sat Mar 18, 2017 7:40 am

Jee-Bee wrote:Wow Didn't know FEM had that amount of icons!!
Me neither 'til I opened the folder! :o

User avatar
agryson
Posts: 453
Joined: Wed Nov 23, 2016 8:30 am
Location: Paris, France
Contact:

Re: FEM Workbench aligned to guidelines

Post by agryson » Sat Mar 18, 2017 8:26 am

Thanks to seeing them all laid out i see i forgot one (the barred circle). Fixed on local now.

triplus
Posts: 8676
Joined: Mon Dec 12, 2011 4:45 pm

Re: FEM Workbench aligned to guidelines

Post by triplus » Sat Mar 18, 2017 1:05 pm

Looking good.

User avatar
agryson
Posts: 453
Joined: Wed Nov 23, 2016 8:30 am
Location: Paris, France
Contact:

Re: FEM Workbench aligned to guidelines

Post by agryson » Sat Mar 18, 2017 1:36 pm


User avatar
bernd
Posts: 8329
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

Re: FEM Workbench aligned to guidelines

Post by bernd » Sat Mar 18, 2017 3:16 pm

Wow!

How do you make these spritesheets?

User avatar
agryson
Posts: 453
Joined: Wed Nov 23, 2016 8:30 am
Location: Paris, France
Contact:

Re: FEM Workbench aligned to guidelines

Post by agryson » Sat Mar 18, 2017 4:51 pm

bernd wrote:How do you make these spritesheets?
I use a bash script with inkscape and imagemagick. Inkscape exports everything to png and imagemagick (montage) stitches them into a spritesheet.
I had to change the script a little to export pngs when present, as was the case for FEM.

EDIT: Here is the bash script if you want.

User avatar
NormandC
Posts: 18534
Joined: Sat Feb 06, 2010 9:52 pm
Location: Québec, Canada

Re: FEM Workbench aligned to guidelines

Post by NormandC » Sat Mar 18, 2017 9:27 pm

agryson wrote:
Jee-Bee wrote:Wow Didn't know FEM had that amount of icons!!
Me neither 'til I opened the folder! :o
LOL. This is a running joke at the office. Always starts with "hey, this won't take long, might as well do it now". :D

Post Reply