Arch : How to use your custom Window

[jpg87]

The normal is automatically calculated, but the value needs to be set to [0,0,0],

I tested what Yorik says in this post :
https://forum.freecadweb.org/viewtopic. ... 68#p299094

If the sketch is moved, and provided the Normal property of the window is (0,0,0), this calculation is done again automatically

So I have prepared a technique for graphically placing windows or doors, both on an oblique wall and on a roof, without the need to calculate normals. I will write an explanation next week.

[jpg87]

The normal is automatically calculated, but the value needs to be set to [0,0,0],

I tested what Yorik says in this post :
https://forum.freecadweb.org/viewtopic. ... 68#p299094

If the sketch is moved, and provided the Normal property of the window is (0,0,0), this calculation is done again automatically

So I have prepared a technique for graphically placing windows or doors, both on an oblique wall and on a roof, without the need to calculate normals. I will write an explanation next week.

Ok, the week has been very long ! (sorry: beyond my control).
But here are videos explaining my way of seeing things :

http://help-freecad-jpg87.fr/04_arch_ind.php

[vocx]

But here are videos explaining my way of seeing things :

http://help-freecad-jpg87.fr/04_arch_ind.php

I added this page to the video tutorials, in the architecture section. I will also add it to the written tutorials.