Installation problems
Moderator: oliveroxtoby
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
Installation problems
Hi Oliver,
many thanks for the introduction to the CfDOF Workbench. They are very well done. I just finished the first one.
I just wanted to report a bug with the Gmsh function, when I saw that you posted a new commit a view hours earlier.
I just tried the new committ and finally the Gmsh function works!! Thank you very much!
I still have issues with the CFD workbench where the installation via the Addon manager gives me an error and there is an initiation error due to the `getmodulePath`in the InitGui.py. Could you assist me there as well?
thanks,
Michael
many thanks for the introduction to the CfDOF Workbench. They are very well done. I just finished the first one.
I just wanted to report a bug with the Gmsh function, when I saw that you posted a new commit a view hours earlier.
I just tried the new committ and finally the Gmsh function works!! Thank you very much!
I still have issues with the CFD workbench where the installation via the Addon manager gives me an error and there is an initiation error due to the `getmodulePath`in the InitGui.py. Could you assist me there as well?
thanks,
Michael
- oliveroxtoby
- Posts: 837
- Joined: Fri Dec 23, 2016 9:43 am
- Location: South Africa
Re: CfdOF Workbench Training Material
Thank you!Michael_P wrote: ↑Wed Feb 21, 2018 10:43 pm Hi Oliver,
many thanks for the introduction to the CfDOF Workbench. They are very well done. I just finished the first one.
I just wanted to report a bug with the Gmsh function, when I saw that you posted a new commit a view hours earlier.
I just tried the new committ and finally the Gmsh function works!! Thank you very much!
I still have issues with the CFD workbench where the installation via the Addon manager gives me an error and there is an initiation error due to the `getmodulePath`in the InitGui.py. Could you assist me there as well?
thanks,
Michael
I wasn't able to reproduce your issue with the Addon manager. Please could you provide more information as detailed in these guidelines I just posted?
Please provide all the information requested in this post before reporting problems with CfdOF.
Re: CfdOF Workbench Training Material
Hi,
here are the details for the installation on my laptop. I marked the sections with errors in bold.
I have installed CFD and CfDOF. However, CFD does not show.
OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.13312 (Git)
Build type: Release
Branch: master
Hash: f445ace40c6e9126d9e3512ca73c6b294c84b24e
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.1.0
Locale: German/Austria (de_AT)
Run Gui init script
Init: Running FreeCADGuiInit.py start script...
Init: Searching modules...
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Sketcher... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\ReverseEngineering... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Show(InitGui.py not found)... ignore
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Image... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\Autoload... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Surface... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\PartDesign... done
Module: Part
Loading Part module... done
Loading Fem module... done
Loading GUI of Fem module... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\old_CfdOF... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Measure(InitGui.py not found)... ignore
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Ship... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Plot... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\MeshPart... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\OpenSCAD... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\Fem... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Spreadsheet... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Start... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Points... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Draft... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Test... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Import... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\Cfd... failed
----------------------------------------------------------------------------------------------------
Traceback (most recent call last):
File "<string>", line 120, in InitApplications
File "<string>", line 87, in <module>
File "<string>", line 34, in __init__
AttributeError: 'module' object has no attribute 'getModulePath'
----------------------------------------------------------------------------------------------------
During initialization the error 'module' object has no attribute 'getModulePath' occurred in C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\Cfd\InitGui.py
Please look into the log file for further information
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\TechDraw... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Tux... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Complete... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Web... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Material... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Raytracing... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Mesh... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Path... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Part... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Arch... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Robot... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\CADExchanger... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\AddonManager... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Idf(InitGui.py not found)... ignore
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Inspection... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Drawing... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\CfDOF... failed
----------------------------------------------------------------------------------------------------
Traceback (most recent call last):
File "<string>", line 120, in InitApplications
File "<string>", line 86, in <module>
KeyError: "'CfdOFWorkbench' already exists."
----------------------------------------------------------------------------------------------------
During initialization the error "'CfdOFWorkbench' already exists." occurred in C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\CfDOF\InitGui.py
Please look into the log file for further information
Init: Loading FreeCAD GUI
Init: Running FreeCADGuiInit.py start script... done
Init: Activating default workbench StartWorkbench
Loading GUI of Web module... done
Loading GUI of Start module... done
Loading Start module... done
not a freecad file: .STL
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
Init: Showing main window
Main window restored
Show main window
Toolbars restored
3Dconnexion device not attached.
Init: Entering event loop
Init: Processing command line files
here are the details for the installation on my laptop. I marked the sections with errors in bold.
I have installed CFD and CfDOF. However, CFD does not show.
OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.13312 (Git)
Build type: Release
Branch: master
Hash: f445ace40c6e9126d9e3512ca73c6b294c84b24e
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.1.0
Locale: German/Austria (de_AT)
Run Gui init script
Init: Running FreeCADGuiInit.py start script...
Init: Searching modules...
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Sketcher... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\ReverseEngineering... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Show(InitGui.py not found)... ignore
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Image... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\Autoload... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Surface... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\PartDesign... done
Module: Part
Loading Part module... done
Loading Fem module... done
Loading GUI of Fem module... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\old_CfdOF... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Measure(InitGui.py not found)... ignore
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Ship... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Plot... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\MeshPart... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\OpenSCAD... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\Fem... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Spreadsheet... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Start... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Points... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Draft... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Test... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Import... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\Cfd... failed
----------------------------------------------------------------------------------------------------
Traceback (most recent call last):
File "<string>", line 120, in InitApplications
File "<string>", line 87, in <module>
File "<string>", line 34, in __init__
AttributeError: 'module' object has no attribute 'getModulePath'
----------------------------------------------------------------------------------------------------
During initialization the error 'module' object has no attribute 'getModulePath' occurred in C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\Cfd\InitGui.py
Please look into the log file for further information
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\TechDraw... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Tux... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Complete... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Web... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Material... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Raytracing... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Mesh... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Path... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Part... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Arch... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Robot... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\CADExchanger... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\AddonManager... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Idf(InitGui.py not found)... ignore
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Inspection... done
Init: Initializing C:\Users\Michael\Downloads\FreeCAD_0.17.13312_x64_dev_win\FreeCAD_0.17.13312_x64_dev_win\Mod\Drawing... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\CfDOF... failed
----------------------------------------------------------------------------------------------------
Traceback (most recent call last):
File "<string>", line 120, in InitApplications
File "<string>", line 86, in <module>
KeyError: "'CfdOFWorkbench' already exists."
----------------------------------------------------------------------------------------------------
During initialization the error "'CfdOFWorkbench' already exists." occurred in C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\CfDOF\InitGui.py
Please look into the log file for further information
Init: Loading FreeCAD GUI
Init: Running FreeCADGuiInit.py start script... done
Init: Activating default workbench StartWorkbench
Loading GUI of Web module... done
Loading GUI of Start module... done
Loading Start module... done
not a freecad file: .STL
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
Init: Showing main window
Main window restored
Show main window
Toolbars restored
3Dconnexion device not attached.
Init: Entering event loop
Init: Processing command line files
Re: CfdOF Workbench Training Material
Hi,
I installed freecad and CFDOf also on my PC where I have 8 cores for parallel processing. I have the same issues with the init.gui but more problematic is the issue with an error while trying to download CFMesh.
Exception: Error downloading cfMesh: [Errno socket error] [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:661)
I have searched the internet but cannot figure out why I have a certificate issue. I can downlaid CFMesh manually from the website without issues.
Can you recommend a way to install CFMesh manually?
OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.13312 (Git)
Build type: Release
Branch: master
Hash: f445ace40c6e9126d9e3512ca73c6b294c84b24e
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.1.0
Locale: English/UnitedStates (en_US)
Run Gui init script
Init: Running FreeCADGuiInit.py start script...
Init: Searching modules...
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Sketcher... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\ReverseEngineering... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Show(InitGui.py not found)... ignore
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Image... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Surface... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\PartDesign... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Measure(InitGui.py not found)... ignore
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Ship... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Plot... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\MeshPart... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\OpenSCAD... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Fem... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Spreadsheet... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Start... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Points... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Draft... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Test... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Import... done
Module: Part
Loading Part module... done
Loading Fem module... done
Loading GUI of Fem module... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\Cfd... failed
----------------------------------------------------------------------------------------------------
Traceback (most recent call last):
File "<string>", line 120, in InitApplications
File "<string>", line 87, in <module>
File "<string>", line 34, in __init__
AttributeError: 'module' object has no attribute 'getModulePath'
----------------------------------------------------------------------------------------------------
During initialization the error 'module' object has no attribute 'getModulePath' occurred in C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\Cfd\InitGui.py
Please look into the log file for further information
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\TechDraw... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Tux... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Complete... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Web... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Material... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Raytracing... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Mesh... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Path... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Part... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Arch... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Robot... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\CADExchanger... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\AddonManager... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Idf(InitGui.py not found)... ignore
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Inspection... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Drawing... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\CfdOF... done
Init: Loading FreeCAD GUI
Init: Running FreeCADGuiInit.py start script... done
Init: Activating default workbench StartWorkbench
Loading GUI of Web module... done
Loading GUI of Start module... done
Loading Start module... done
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
Init: Showing main window
Main window restored
Show main window
Toolbars restored
3Dconnexion device not attached.
Init: Entering event loop
Init: Processing command line files
Group icon for preferences-cfd is not of size 96x96
Running echo $WM_PROJECT_USER_DIR
Raw command: [u'C:/Programs/FreeCAD_0.17.13312_x64_dev_win/bin\\python.exe', '-u', 'C:\\Users\\Michael\\AppData\\Roaming\\FreeCAD\\Mod\\CfdOF\\WindowsRunWrapper.py', 'C:\\PROGRA~1\\BLUECF~1\\OPENFO~1.X\\..\\msys64\\usr\\bin\\bash', '--login', '-O', 'expand_aliases', '-c', 'echo $WM_PROJECT_USER_DIR']
Setting environment for OpenFOAM 4.x mingw-w64 Double Precision (of4-64), using MSMPI71 - please wait...
Environment is now ready. Notes:
- You can change between installed versions by running: ofmenu
- You can change to other predefined versions by running: ofmenuNew
/home/ofuser/blueCFD/ofuser-of4
Traceback (most recent call last):
File "C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\CfdOF\CfdPreferencePage.py", line 205, in run
self.downloadCfMesh()
File "C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\CfdOF\CfdPreferencePage.py", line 245, in downloadCfMesh
raise Exception("Error downloading cfMesh: {}".format(str(ex)))
Exception: Error downloading cfMesh: [Errno socket error] [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:661)
thanks,
Michael
I installed freecad and CFDOf also on my PC where I have 8 cores for parallel processing. I have the same issues with the init.gui but more problematic is the issue with an error while trying to download CFMesh.
Exception: Error downloading cfMesh: [Errno socket error] [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:661)
I have searched the internet but cannot figure out why I have a certificate issue. I can downlaid CFMesh manually from the website without issues.
Can you recommend a way to install CFMesh manually?
OS: Windows 7
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.13312 (Git)
Build type: Release
Branch: master
Hash: f445ace40c6e9126d9e3512ca73c6b294c84b24e
Python version: 2.7.14
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 7.1.0
Locale: English/UnitedStates (en_US)
Run Gui init script
Init: Running FreeCADGuiInit.py start script...
Init: Searching modules...
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Sketcher... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\ReverseEngineering... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Show(InitGui.py not found)... ignore
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Image... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Surface... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\PartDesign... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Measure(InitGui.py not found)... ignore
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Ship... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Plot... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\MeshPart... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\OpenSCAD... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Fem... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Spreadsheet... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Start... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Points... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Draft... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Test... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Import... done
Module: Part
Loading Part module... done
Loading Fem module... done
Loading GUI of Fem module... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\Cfd... failed
----------------------------------------------------------------------------------------------------
Traceback (most recent call last):
File "<string>", line 120, in InitApplications
File "<string>", line 87, in <module>
File "<string>", line 34, in __init__
AttributeError: 'module' object has no attribute 'getModulePath'
----------------------------------------------------------------------------------------------------
During initialization the error 'module' object has no attribute 'getModulePath' occurred in C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\Cfd\InitGui.py
Please look into the log file for further information
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\TechDraw... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Tux... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Complete... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Web... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Material... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Raytracing... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Mesh... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Path... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Part... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Arch... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Robot... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\CADExchanger... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\AddonManager... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Idf(InitGui.py not found)... ignore
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Inspection... done
Init: Initializing C:\Programs\FreeCAD_0.17.13312_x64_dev_win\Mod\Drawing... done
Init: Initializing C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\CfdOF... done
Init: Loading FreeCAD GUI
Init: Running FreeCADGuiInit.py start script... done
Init: Activating default workbench StartWorkbench
Loading GUI of Web module... done
Loading GUI of Start module... done
Loading Start module... done
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
QNetworkAccessFileBackendFactory: URL has no schema set, use file:// for files
Init: Showing main window
Main window restored
Show main window
Toolbars restored
3Dconnexion device not attached.
Init: Entering event loop
Init: Processing command line files
Group icon for preferences-cfd is not of size 96x96
Running echo $WM_PROJECT_USER_DIR
Raw command: [u'C:/Programs/FreeCAD_0.17.13312_x64_dev_win/bin\\python.exe', '-u', 'C:\\Users\\Michael\\AppData\\Roaming\\FreeCAD\\Mod\\CfdOF\\WindowsRunWrapper.py', 'C:\\PROGRA~1\\BLUECF~1\\OPENFO~1.X\\..\\msys64\\usr\\bin\\bash', '--login', '-O', 'expand_aliases', '-c', 'echo $WM_PROJECT_USER_DIR']
Setting environment for OpenFOAM 4.x mingw-w64 Double Precision (of4-64), using MSMPI71 - please wait...
Environment is now ready. Notes:
- You can change between installed versions by running: ofmenu
- You can change to other predefined versions by running: ofmenuNew
/home/ofuser/blueCFD/ofuser-of4
Traceback (most recent call last):
File "C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\CfdOF\CfdPreferencePage.py", line 205, in run
self.downloadCfMesh()
File "C:\Users\Michael\AppData\Roaming\FreeCAD\Mod\CfdOF\CfdPreferencePage.py", line 245, in downloadCfMesh
raise Exception("Error downloading cfMesh: {}".format(str(ex)))
Exception: Error downloading cfMesh: [Errno socket error] [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:661)
thanks,
Michael
Re: CfdOF Workbench Training Material
Hi Michael, can you please use the code tags? You may edit your posts to make them more readable.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- oliveroxtoby
- Posts: 837
- Joined: Fri Dec 23, 2016 9:43 am
- Location: South Africa
Re: CfdOF Workbench Training Material
The error relating to CfdOF appears to be because you have two directories, old_CfdOF and CfdOF, both of which FreeCAD is trying to load and they are colliding. Only the first is loaded (old_CfdOF). You would need to move this to another directory as it will try to load every module it finds in the Mod directory.
The error relating to CFD is possibly a bug in that workbench. I am not involved there so cannot comment.
Please provide all the information requested in this post before reporting problems with CfdOF.
- oliveroxtoby
- Posts: 837
- Joined: Fri Dec 23, 2016 9:43 am
- Location: South Africa
Re: CfdOF Workbench Training Material
Puzzling. Are you behind a proxy server by any chance?Michael_P wrote: ↑Sat Mar 10, 2018 3:27 pm Hi,
I installed freecad and CFDOf also on my PC where I have 8 cores for parallel processing. I have the same issues with the init.gui but more problematic is the issue with an error while trying to download CFMesh.
Exception: Error downloading cfMesh: [Errno socket error] [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:661)
I have searched the internet but cannot figure out why I have a certificate issue. I can downlaid CFMesh manually from the website without issues.
It would be nice to add a way to pick the downloaded file yourself, but for now the following should hopefully work:
- Save the downloaded file cfMesh-v1.1.2.tar.gz to C:\Program Files\blueCFD-Core-2016\ofuser-of4
- Run 'BlueCFD core terminal' from the start menu
- cd blueCFD/ofuser-of4
- tar -xzf cfMesh-v1.1.2.tar.gz
- ./buildCfMeshOnBlueCFD.sh
Please provide all the information requested in this post before reporting problems with CfdOF.
Re: CfdOF Workbench Training Material
Hi,
thanks for the help.
However I get stuck at "tar -xzf cfMesh-v1.1.2.tar.gz"
The file from Github is a tgz. Even after renaming and performing "tar -xzf cfMesh-v1.1.2.tar.gz" I get
tar (child): cfMesh-v1.1.2.tar.gz: Cannot open:
No such file or directory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now.
I am probably just to unskilled to do it right but I am giving up for the moment.
A wider internet search brought me to this forum "https://stackoverflow.com/questions/454 ... ify-failed" with some suggestions to overcome certification issues
I am not a programmer, hence I am not much of a help here.
thanks,
Michael
thanks for the help.
However I get stuck at "tar -xzf cfMesh-v1.1.2.tar.gz"
The file from Github is a tgz. Even after renaming and performing "tar -xzf cfMesh-v1.1.2.tar.gz" I get
tar (child): cfMesh-v1.1.2.tar.gz: Cannot open:
No such file or directory
tar (child): Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error is not recoverable: exiting now.
I am probably just to unskilled to do it right but I am giving up for the moment.
A wider internet search brought me to this forum "https://stackoverflow.com/questions/454 ... ify-failed" with some suggestions to overcome certification issues
I am not a programmer, hence I am not much of a help here.
thanks,
Michael
Re: CfdOF Workbench Training Material
Hi,
still at installing cfMesh.
I finally was able to unzip the file.
However, now I am stuck at ./buildCfMeshOnBlueCFD.sh
I copied the file into the ofuser.of4 folder but I get syntax error due to line 7.
I also tried Allwmake (./Allwmake) but without success.
Could you please enlighten me what I should do?
thanks,
Michael
still at installing cfMesh.
I finally was able to unzip the file.
However, now I am stuck at ./buildCfMeshOnBlueCFD.sh
I copied the file into the ofuser.of4 folder but I get syntax error due to line 7.
I also tried Allwmake (./Allwmake) but without success.
Could you please enlighten me what I should do?
thanks,
Michael
- oliveroxtoby
- Posts: 837
- Joined: Fri Dec 23, 2016 9:43 am
- Location: South Africa
Re: CfdOF Workbench Training Material
Could you paste the actual output that you get when you execute ./buildCfMeshOnBlueCFD.sh ?
Please provide all the information requested in this post before reporting problems with CfdOF.