Tutorial 2 _ yes and no

A subforum specific to the development of the OpenFoam-based workbenches ( Cfd https://github.com/qingfengxia/Cfd and CfdOF https://github.com/jaheyns/CfdOF )

Moderator: oliveroxtoby

Forum rules
and Helpful information for the FEM forum
IMPORTANT: Please click here and read this first, before posting on this CfdOF fourm
Post Reply
ljb
Posts: 43
Joined: Tue Sep 04, 2018 3:56 pm

Re: Tutorial 2 _ yes and no

Post by ljb »

Ah ha. The origin is not on the center of the bottom face of the cube.

It is on one corner of the cube.

So 0,0,1 is still on the surface (an edge actually), not inside.

; - )
Top
Post Reply

Return to “CfdOF / CFD”