https://www.freecadweb.org/wiki/File:Fem-analysis.svg
or
https://www.freecadweb.org/wiki/File:Fem_Analysis.svg
Which FEM Analysis Icon is the one we use ?
Moderator: bernd
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
Which FEM Analysis Icon is the one we use ?
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Re: Which FEM Analysis Icon is the one we use ?
In the source code, the file is called "fem-analysis.svg".
In the wiki all pages should start with a capital letter, so the wiki calls this file, "Fem-analysis.svg".
The icon "Fem_Analysis.svg" looks a bit bigger, and the color is a bit darker. Moreover, this icon is only used in what appears to be a test page by quick61 from 2014, Artwork_quick61_rework.
Therefore, I think the second of the icons that you present can be removed.
Always add the important information to your posts if you need help. Also see Tutorials and Video tutorials.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
Re: Which FEM Analysis Icon is the one we use ?
wait! The second one looks much better! I will have a look. Icons in FEM where renamed a few times.
Re: Which FEM Analysis Icon is the one we use ?
It is the opposite! The second one is the one which is used in source code and which is therefor used in FreeCAD software. This should stay as it is in the wiki! https://github.com/FreeCAD/FreeCAD/blob ... alysis.svgvocx wrote: ↑Sat Feb 15, 2020 1:27 am The icon "Fem_Analysis.svg" looks a bit bigger, and the color is a bit darker. Moreover, this icon is only used in what appears to be a test page by quick61 from 2014, Artwork_quick61_rework.
Therefore, I think the second of the icons that you present can be removed.
Re: Which FEM Analysis Icon is the one we use ?
bernd wrote: ↑Sat Feb 15, 2020 11:52 am It is the opposite! The second one is the one which is used in source code and which is therefor used in FreeCAD software. This should stay as it is in the wiki! https://github.com/FreeCAD/FreeCAD/blob ... alysis.svg
I'll remove the 1st icon then and re-name the link on the pages that use it.
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Re: Which FEM Analysis Icon is the one we use ?
Well, I was talking about the page name, as that is what matters in the wiki.
The page "Fem-analysis.svg" should be kept. Of course, its content can be updated with the actual icon used in the source code but that's a trivial step.
Always add the important information to your posts if you need help. Also see Tutorials and Video tutorials.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
Re: Which FEM Analysis Icon is the one we use ?
Can we rename it in the source code then?
So it's all uniform ?
Aren't other icons using snake_case ?
So it's all uniform ?
Aren't other icons using snake_case ?
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Re: Which FEM Analysis Icon is the one we use ?
There is nothing standard in FreeCAD, in general. This is the reason we need to improve standardization across different workbenches.
In FEM, icons are like this.
Code: Select all
ls -1 src/Mod/Fem/Gui/Resources/icons/
Arch_Material_Group.svg
fem-add-fem-mesh.svg
fem-add-material.svg
fem-add-part.svg
fem-analysis.svg
fem-clipping-plane-add.svg
fem-clipping-plane-remove-all.svg
fem-constraint-bearing.svg
fem-constraint-contact.svg
fem-constraint-displacement.svg
fem-constraint-electrostatic-potential.svg
fem-constraint-fixed.svg
fem-constraint-flow-velocity.svg
fem-constraint-fluid-boundary.svg
fem-constraint-force.svg
fem-constraint-gear.svg
fem-constraint-heatflux.svg
fem-constraint-initial-flow-velocity.svg
fem-constraint-initial-temperature.svg
fem-constraint-planerotation.svg
fem-constraint-pressure.svg
fem-constraint-pulley.svg
fem-constraint-selfweight.svg
fem-constraint-temperature.svg
fem-constraint-transform.svg
fem-element-fluid-1d.svg
fem-element-geometry-1d.svg
fem-element-geometry-2d.svg
fem-element-rotation-1d.svg
fem-equation-elasticity.svg
fem-equation-electrostatic.svg
fem-equation-flow.svg
fem-equation-fluxsolver.svg
fem-equation-heat.svg
fem-femmesh-boundary-layer.svg
fem-femmesh-clear-mesh.svg
fem-femmesh-create-node-by-poly.svg
fem-femmesh-from-shape.svg
fem-femmesh-gmsh-from-shape.svg
fem-femmesh-netgen-from-shape.svg
fem-femmesh-print-info.svg
fem-femmesh-region.svg
fem-femmesh-result.svg
fem-femmesh-to-mesh.svg
fem-material-fluid.svg
fem-material-nonlinear.svg
fem-material-reinforced.svg
fem-material.svg
fem-post-data-pipline.svg
fem-post-filter-clip-region.svg
fem-post-filter-clip-scalar.svg
fem-post-filter-cut-function.svg
fem-post-filter-data-along-line.svg
fem-post-filter-data-at-point.svg
fem-post-filter-linearized-stresses.svg
fem-post-filter-warp.svg
fem-post-geo-box.svg
fem-post-geo-cylinder.svg
fem-post-geo-isosurface.svg
fem-post-geo-plane.svg
fem-post-geo-sphere.svg
fem-post-result-show.svg
fem-post-results-purge.svg
fem-solver-analysis-frequency.svg
fem-solver-analysis-static.svg
fem-solver-analysis-thermomechanical.svg
fem-solver-control.svg
fem-solver-elmer.svg
fem-solver-inp-editor.svg
fem-solver-run.svg
fem-solver-standard.svg
FemWorkbench.svg
preferences-fem.svg
Always add the important information to your posts if you need help. Also see Tutorials and Video tutorials.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
To support the documentation effort, and code development, your donation is appreciated: liberapay.com/FreeCAD.
Re: Which FEM Analysis Icon is the one we use ?
Is this a project that someone int the FEM community would be able to tackle before the upcoming release in April ? It would be very good to uniform the documentation as best as possible before that.
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs