I tried to install HISA, and went through the tutorials to check for any issues. None of the tutorials work because HISA was not found:
Code: Select all
--> FOAM Warning :
From function bool Foam::dlLibraryTable::open(const Foam::fileName&, bool)
in file db/dynamicLibrary/dlLibraryTable/dlLibraryTable.C at line 105
could not load "libhisaFiniteVolume.so"
In the above picture, Output says that everything is OK. But it is not, as the Report View (panel) says:
Code: Select all
Checking CFD workbench dependencies...
Checking FreeCAD version
Checking for OpenFOAM:
Running echo $WM_PROJECT_VERSION
Raw command: ['C:/Program Files/FreeCAD 0.18/bin\python.exe', '-u', 'C:\Users\MyPC\AppData\Roaming\FreeCAD\Mod\CfdOF\WindowsRunWrapper.py', 'C:/PROGRA1/BLUECF1/OPENFO~1.X\..\msys64\usr\bin\bash', '--login', '-O', 'expand_aliases', '-c', 'echo $WM_PROJECT_VERSION']
Setting environment for OpenFOAM 5.x mingw-w64 Double Precision (of5-64), using MSMPI71 - please wait...
Environment is now ready. Notes:
You can change between installed versions by running: ofmenu
You can change to other predefined versions by running: ofmenuNew
5.x
Running cartesianMesh -version
Raw command: ['C:/Program Files/FreeCAD 0.18/bin\python.exe', '-u', 'C:\Users\MyPC\AppData\Roaming\FreeCAD\Mod\CfdOF\WindowsRunWrapper.py', 'C:/PROGRA1/BLUECF1/OPENFO~1.X\..\msys64\usr\bin\bash', '--login', '-O', 'expand_aliases', '-c', 'cartesianMesh -version']
Setting environment for OpenFOAM 5.x mingw-w64 Double Precision (of5-64), using MSMPI71 - please wait...
Environment is now ready. Notes:
You can change between installed versions by running: ofmenu
You can change to other predefined versions by running: ofmenuNew
/---------------------------------------------------------------------------
| ========= | |
| \ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \ / O peration | Version: 5.x |
| \ / A nd | Web: www.OpenFOAM.org |
| \/ M anipulation | |
*---------------------------------------------------------------------------/
/ Windows 32 and 64 bit porting by blueCAPE: http://www.bluecape.com.pt
| Based on Windows porting (2.0.x v4) by Symscape: http://www.symscape.com |
*---------------------------------------------------------------------------/
Build : 5.x-963176928289
Exec : C:/PROGRA1/BLUECF1/ofuser-of5/platforms/mingw_w64GccDPInt32Opt/bin/cartesianMesh.exe -version
Date : May 26 2020
Time : 21:29:13
Host : "MyPC"
PID : 6992
I/O : uncollated
Case : C:/PROGRA1/BLUECF1/msys64/home/ofuser
nProcs : 1
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10)
allowSystemOperations : Allowing user-supplied system call operations
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
cfMesh-CfdOF (cfMesh 1.1.2) 1.6
Running hisa -version
Raw command: ['C:/Program Files/FreeCAD 0.18/bin\python.exe', '-u', 'C:\Users\MyPC\AppData\Roaming\FreeCAD\Mod\CfdOF\WindowsRunWrapper.py', 'C:/PROGRA1/BLUECF1/OPENFO~1.X\..\msys64\usr\bin\bash', '--login', '-O', 'expand_aliases', '-c', 'hisa -version']
Setting environment for OpenFOAM 5.x mingw-w64 Double Precision (of5-64), using MSMPI71 - please wait...
Environment is now ready. Notes:
You can change between installed versions by running: ofmenu
You can change to other predefined versions by running: ofmenuNew
/---------------------------------------------------------------------------
| ========= | |
| \ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \ / O peration | Version: 5.x |
| \ / A nd | Web: www.OpenFOAM.org |
| \/ M anipulation | |
*---------------------------------------------------------------------------/
/ Windows 32 and 64 bit porting by blueCAPE: http://www.bluecape.com.pt
| Based on Windows porting (2.0.x v4) by Symscape: http://www.symscape.com |
*---------------------------------------------------------------------------/
Build : 5.x-963176928289
Exec : C:/PROGRA1/BLUECF1/ofuser-of5/platforms/mingw_w64GccDPInt32Opt/bin/hisa.exe -version
Date : May 26 2020
Time : 21:29:15
Host : "MyPC"
PID : 5644
I/O : uncollated
Case : C:/PROGRA1/BLUECF1/msys64/home/ofuser
nProcs : 1
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).
fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10)
allowSystemOperations : Allowing user-supplied system call operations
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
--> FOAM Warning :
From function void* Foam::dlOpen(const Foam::fileName&, bool)
in file MSwindows.C at line 1336
LoadLibrary failed. "Error 126: The specified module could not be found.
"
hisa 1.1.3
Checking for paraview:
Checking for Plot workbench:
Checking for gmsh:
Completed CFD dependency check
Suggestion: Might it be possible that blueCFD-Core is not yet ready for hisa 1.1.3? Or is it another issue (installation error, FreeCAD bug ...?)?
Any suggestions welcome!
Greetz,
Roland