Im troubled by the last milling Path I made from FreeCAD...
In the final output, it miss the "Fixture op" and the "1st tool operation" (I have only one tool in my job).
They are not send to the post processor!?!?
So, the G5X (coordinate system selection) and the spindle start order are missing in the final GCode file.
During the last real machining that I carried out in February, it still worked...
When it worked fine:
Code: Select all
N100 (Exported by FreeCAD) N110 (Post Processor: grbl_post) N120 (Output Time:2020-01-28 17:55:00.041375) N130 (Begin preamble) N140 G17 G90 N150 G21 N160 (Begin operation: Fixture) N170 (Path: Fixture) N180 G54 N190 G0 Z5.000 N200 (Finish operation: Fixture) N210 (Begin operation: T2: Fraise D3x7) N220 (Path: T2: Fraise D3x7) N230 (T2: Fraise D3x7) N240 (Begin toolchange) N250 (M6 T2.0) N260 M3 S12000.0 N270 (Finish operation: T2: Fraise D3x7) N280 (Begin operation: Profile_Faces) N290 (Path: Profile_Faces) N300 (Profile_Faces) N310 (Compensated Tool Path. Diameter: 3.0) N320 G0 Z5.000 (...)
Should I do open a bug ?
Thanks for your work and your replies,