hfcNastran95 demo cases
Moderator: bernd
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
Re: hfcNastran95 demo cases
the code is here. https://forum.freecadweb.org/viewtopic.php?f=18&t=49055
Re: hfcNastran95 demo cases
Mesh of large problem 3 from freeBSD distribution of NASTRAN-95
Re: hfcNastran95 demo cases
It is a plate with a slot in the middle. Pulled at top and bottom ends. Only 1/4 is modeled.
Full combined result could be seen here https://forum.freecadweb.org/viewtopic.php?f=18&t=51098
https://github.com/nasa/NASTRAN-95/blob ... 06011a.txt
Full combined result could be seen here https://forum.freecadweb.org/viewtopic.php?f=18&t=51098
https://github.com/nasa/NASTRAN-95/blob ... 06011a.txt
Re: hfcNastran95 demo cases
Symmetric Buckling of a Cylinder
https://github.com/nasa/NASTRAN-95/blob ... 05011a.txt
https://github.com/nasa/NASTRAN-95/blob ... 05011a.txt
Re: hfcNastran95 demo cases
No, it just open for edit & view F06 file. I have removed the saying at github.peterh4000 wrote: ↑Wed Mar 30, 2022 3:39 pm Thanks for the quick reply!
When opening the .F06 file with notepad, does your code then create the mesh and results objects that FreeCAD displays?
I guess I don't see where you go from looking at the text output file in notepad, to displaying results in FreeCAD.
Or does opening the .F06 add results to already created mesh objects established from opening an input file and using hfcNastran95InpInFem.py?
I'm pretty sure I can sort out the filename issues, I'm trying to read through your code and see what it does with the files once opened. Is there a FreeCAD standard object for the finite element meshes and results that you get out of the files?
Thanks for any help.
-Peter-
It was another command to plot result, but I did not post that. Later I moved to Mystran. It can plot result, but use unv file.
see here: https://forum.freecadweb.org/viewtopic.php?f=18&t=46171