options to be implemented for the hole depth

About the development of the Part Design module/workbench. PLEASE DO NOT POST HELP REQUESTS HERE!
Post Reply
Piero69
Posts: 69
Joined: Thu Jul 04, 2019 1:22 pm

options to be implemented for the hole depth

Post by Piero69 » Wed Oct 09, 2019 10:58 am

in the hole feature you need two important options to be implemented for the hole depth

1. "to the next surface" (automatic)
2. "to a surface" (suface to be selected by user)

what do you think?
openBrain
Posts: 3049
Joined: Fri Nov 09, 2018 5:38 pm

Re: options to be implemented for the hole depth

Post by openBrain » Wed Oct 09, 2019 1:53 pm

ATM I can't see any useful application. Conventionally, a hole is either blind (so defined by a distance) or through-all. ;)
Can you give an example where it will make sense ?
RatonLaveur
Posts: 430
Joined: Wed Mar 27, 2019 10:45 am

Re: options to be implemented for the hole depth

Post by RatonLaveur » Wed Oct 09, 2019 3:46 pm

I can give you ten. I'll settle for one :)
Thick tube. Need a threaded through hole from OuterDiameter to InnerDiameter. That hole needs to not go through the whole tube only one wall. Hence I'd benefit from being able to link it to the inner surface of the tube.

How about that?
chrisb
Posts: 21295
Joined: Tue Mar 17, 2015 9:14 am

Re: options to be implemented for the hole depth

Post by chrisb » Wed Oct 09, 2019 4:43 pm

You can have this situation with all kind of cases like boxes, engine housing, etc., where you want to go through the first wall, but never through all.
Besides that from a more general view, a hole is a special kind of pocket and can well provide the same types. (I don't see the "two dimensions" though).
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest