[Duplicate] Possible bug: Cross-hair misaligned in Sketcher

About the development of the Part Design module/workbench. PLEASE DO NOT POST HELP REQUESTS HERE!
chrisb
Posts: 30620
Joined: Tue Mar 17, 2015 9:14 am

Re: Possible bug: Cross-hair misaligned in Sketcher

Post by chrisb » Sat Sep 19, 2020 9:39 pm

I guess it is intended, or nobody cared much about it, because it is in the Start page, where no real modeling takes place. It is here on MacOS the same, while there were no issues with the constraints selection of points.
You need at least FreeCAD 0.19.23300 to edit my current sketches.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
chrisb
Posts: 30620
Joined: Tue Mar 17, 2015 9:14 am

Re: Possible bug: Cross-hair misaligned in Sketcher

Post by chrisb » Sun Sep 20, 2020 6:08 am

davidosterberg wrote:
Fri Sep 18, 2020 6:04 pm
The cross hair in sketcher is not actually aligned with the coordinates.
Do you too have a hidpi display?
You need at least FreeCAD 0.19.23300 to edit my current sketches.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
JohnOCFII
Posts: 32
Joined: Sun Sep 20, 2020 5:46 pm

Re: Possible bug: Cross-hair misaligned in Sketcher

Post by JohnOCFII » Wed Sep 23, 2020 2:42 am

davidosterberg wrote:
Fri Sep 18, 2020 6:04 pm

The cross hair in sketcher is not actually aligned with the coordinates.
I'm seeing the same behavior. I'm on a 2018 MacBook Pro, with a fresh install of FreeCAD 0.19 - never had an older version installed.
Sadly the cursor wasn't captured in the screen grab, but the cursor was directly over the RootPoint when I snapped the image.

I'm only on hour number 3 with FreeCAD, so this could certainly be user error on my part.

John

-------------------------

OS: macOS 10.15
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.22474 (Git)
Build type: Release
Branch: master
Hash: a44f8ffd427fa9b23b1f00dbf62d66cd152cd774
Python version: 3.8.5
Qt version: 5.12.9
Coin version: 4.0.0
OCC version: 7.4.0
Locale: C/Default (C)
Attachments
Screen Shot 2020-09-22 at 9.35.40 PM.png
Screen Shot 2020-09-22 at 9.35.40 PM.png (17.08 KiB) Viewed 274 times
wmayer
Site Admin
Posts: 16849
Joined: Thu Feb 19, 2009 10:32 am

Re: Possible bug: Cross-hair misaligned in Sketcher

Post by wmayer » Wed Sep 23, 2020 9:22 am

JohnOCFII
Posts: 32
Joined: Sun Sep 20, 2020 5:46 pm

Re: Possible bug: Cross-hair misaligned in Sketcher

Post by JohnOCFII » Wed Sep 23, 2020 1:48 pm

Thanks for the pointer to the issue. Glad to see it wasn't just me. :)
akamenskiy
Posts: 9
Joined: Wed Sep 23, 2020 4:50 pm

Re: Possible bug: Cross-hair misaligned in Sketcher

Post by akamenskiy » Wed Sep 23, 2020 4:57 pm

Same issue here, misaligned cross-hair.

macos 10.15.6
FreeCAD 0.19-22474

FWIW, I am using 4k displays w/ hidpi and I noticed quite a few issues with alignment here and there. But this one is definitely most annoying as I am trying to "hit the spot" ever time.
User avatar
Kunda1
Posts: 9209
Joined: Thu Jan 05, 2017 9:03 pm

Re: [Duplicate] Possible bug: Cross-hair misaligned in Sketcher

Post by Kunda1 » Thu Sep 24, 2020 1:31 pm

Mod edit: Marked thread as duplicate + locking.
Please continue the discussion in
Alone you go faster. Together we go farther
Want to contribute back to FC? Checkout:
#lowhangingfruit | Use the Source, Luke. | How to Help FreeCAD | How to report FC bugs and features
Locked

Who is online

Users browsing this forum: No registered users and 1 guest