Thanks all for the great support,
I checked out the latest master and compiled it.
OS: Ubuntu 18.04.3 LTS (ubuntu:GNOME/ubuntu)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.18779 (Git)
Build type: Unknown
Branch: master
Hash: cbe161b4e464a49e8d16fd9a1bf3b5e8d72de24d
Python version: 3.6.8
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
Closing FreeCAD I get the questions for saving all dependent files, each file gave an error message:
<Gui> Document.cpp(996): Document::getDependentDocuments: The graph must be a DAG.
This was already in earlier versions the case.
I hope the saved file is now without any absolute paths. But as stated by Zolko, there is at the moment no way to mill directly from assembly 4 parts.
If someone has another idea I'm glad to hear about.
Regards Sören
Using Parts in Path from an Assembly 4
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: Using Parts in Path from an Assembly 4
- Attachments
-
- flinny_box.zip
- Just saved ine latest FreeCad
- (180.52 KiB) Downloaded 25 times
Re: Using Parts in Path from an Assembly 4
It's not possible to mill from an App::Part, and since Assembly4 uses App::Part as building blocks you can't directly mill. What you can do is copy the body/solid of your part into a new document, and do the Path things there:
BUT ... why do you have 2 files for the 2 large sides, and 2 for the 2 small sides: are they not identical ? Because if they are identical, you are supposed to have 1 file for the large sides, and link that file twice into the assembly. That's the whole point of App::Link.
Re: Using Parts in Path from an Assembly 4
I tried to create a simple copy of the whole Part. It sort of worked, i.e. it looks ok, but Check geometry shows lots of errors and Path doesn't recognize any of the solids either.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Using Parts in Path from an Assembly 4
Thank your for already trying this, I didn't find the time yesterday, is it possible that the errors arise from the dependency to the worksheet with the measurements ?