Dear all,
imo there is still a problem with A2plus on import of files with boolean operations of bodies.
Regarding the Screw it works, if your last operation was a thing like Chamfer, if not then you get all bodies on import, regardless the visible/unvisible setting of parts/bodies (see picture).
Kind regards
Falk
Importing With A2 Plus Workbench looses Boolean Cut
Forum rules
and Helpful information
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help
Also, be nice to others! Read the FreeCAD code of conduct!
Also, be nice to others! Read the FreeCAD code of conduct!
Re: Importing With A2 Plus Workbench looses Boolean Cut
- Attachments
-
- Pic1.png (101.19 KiB) Viewed 190 times
Re: Importing With A2 Plus Workbench looses Boolean Cut
Current A2Plus is 0.4.45c. Please update, test again and provide the file which you tested with. Your file, not one from the forum. Also dont forget your FreeCAD version info (Help/About FreeCAD/Copy to clipboard).
Re: Importing With A2 Plus Workbench looses Boolean Cut
Thanks for the hint, updated A2Plus from 0.4.29 to 4.45, and now it works fine.
Sorry for my misleading post.
Sorry for my misleading post.