Bug Reports for v0.19

Post here for help on using FreeCAD's graphical user interface (GUI).
Forum rules
and Helpful information
IMPORTANT: Please click here and read this first, before asking for help

Also, be nice to others! Read the FreeCAD code of conduct!
GeneFC
Posts: 1347
Joined: Sat Mar 19, 2016 3:36 pm
Location: Punta Gorda, FL

Re: Bug Reports for v0.19

Post by GeneFC » Sun Aug 02, 2020 12:59 am

I am pretty sure the offsets are working correctly. You may not realize the complexity due to various coordinate systems.

Objects like datum planes and sketches have their own local coordinate system (LCS). This is different from the global coordinate system in some cases, and it can be confusing.

In particular these planar objects are always located in their local x-y plane. The z-axis is always perpendicular to the object. If the datum plane or sketch does not lie in the global x-y plane it can look like x, y, and z get mixed up.

You did not show an example, so I made a simple example for myself with a datum plane tipped up parallel to the global x-z plane. If I move the datum plane back and forth along its normal it is moving in the y-direction globally (shown in "Base" section of the property panel), but in the z-direction locally (shown in "Attachment" section of the property panel). Both are shown in the in the lower portion of the Combo panel. If the datum plane is already attached to something I can only move the Attachment coordinates and not the Base coordinates. The Base coordinates follow along; I just cannot change them directly.

If you are not familiar with this sort of multiple coordinate system behavior it may take some practice. However, it is working consistently and correctly.

Gene
Smiling_user
Posts: 45
Joined: Tue Jul 28, 2020 7:31 am

Re: Bug Reports for v0.19

Post by Smiling_user » Sun Aug 02, 2020 7:58 pm

Gene on occasion I'll check your supposition.

By now: for the square crossectioned detail (Body001, Pad,Sketch003) connecting two sides could not use "Extrude up to face" in the file attached.
And also when importing this file with A2Plus into another file - only original side showed up. The mirrored part does not show to be imported.

Today while using Sketcher - for a while vertical and horizontal constraints and dimensions - cross-shifted thy're functions. But on the next opening of another sketch it disappeared. Te difference was in planes:
Within XY plane all goes as expected.
Bu within XZ and YZ planes - something goes buggy in UI: functions still work but they jump under other icons this time - in Sketcher.
Attachments
Handle_Det_HandleSideFront.FCStd
(54.6 KiB) Downloaded 3 times
GeneFC
Posts: 1347
Joined: Sat Mar 19, 2016 3:36 pm
Location: Punta Gorda, FL

Re: Bug Reports for v0.19

Post by GeneFC » Sun Aug 02, 2020 9:57 pm

I cannot see any connection to origin coordinates anywhere. Everything is floating.

No connection to origins.PNG
No connection to origins.PNG (47.33 KiB) Viewed 65 times

I do not know what to expect when there is no connection to the coordinate system.

Gene
Smiling_user
Posts: 45
Joined: Tue Jul 28, 2020 7:31 am

Re: Bug Reports for v0.19

Post by Smiling_user » Tue Aug 04, 2020 6:17 am

Not shure if this is something noticeble:
Report View

Code: Select all

02:11:54  OpenGL version is: 2.1 (2.1 Mesa 19.2.8)
02:11:54  Run Gui init script
02:11:54  Init: Running FreeCADGuiInit.py start script...
02:11:54  Init:   Searching modules...
02:11:54  Init:      Initializing /usr/share/freecad-daily/Mod/Part... done
02:11:54  Init:      Initializing /usr/share/freecad-daily/Mod/Raytracing... done
02:11:54  Init:      Initializing /usr/share/freecad-daily/Mod/Points... done
02:11:55  Init:      Initializing /usr/share/freecad-daily/Mod/Tux... done
02:11:55  Init:      Initializing /usr/share/freecad-daily/Mod/ReverseEngineering... done
02:11:55  Init:      Initializing /usr/share/freecad-daily/Mod/OpenSCAD... done
02:11:55  Init:      Initializing /usr/share/freecad-daily/Mod/Start... done
02:11:55  Init:      Initializing /usr/share/freecad-daily/Mod/PartDesign... done
02:11:55  Init:      Initializing /usr/share/freecad-daily/Mod/Import... done
02:11:55  Init:      Initializing /usr/share/freecad-daily/Mod/Sketcher... done
02:11:55  Init:      Initializing /usr/share/freecad-daily/Mod/Robot... done
02:11:55  Init:      Initializing /usr/share/freecad-daily/Mod/AddonManager... done
02:11:55  Init:      Initializing /usr/share/freecad-daily/Mod/TechDraw... done
02:11:55  Init:      Initializing /usr/share/freecad-daily/Mod/Drawing... done
02:11:55  Init:      Initializing /usr/share/freecad-daily/Mod/Complete... done
02:11:55  Init:      Initializing /usr/share/freecad-daily/Mod/Measure(InitGui.py not found)... ignore
02:11:55  Init:      Initializing /usr/share/freecad-daily/Mod/Show(InitGui.py not found)... ignore
02:11:56  Init:      Initializing /usr/share/freecad-daily/Mod/Draft... done
02:11:56  Init:      Initializing /usr/share/freecad-daily/Mod/Idf(InitGui.py not found)... ignore
02:11:56  Init:      Initializing /usr/share/freecad-daily/Mod/Arch... done
02:11:56  Init:      Initializing /usr/share/freecad-daily/Mod/Image... done
02:11:56  Init:      Initializing /usr/share/freecad-daily/Mod/Surface... done
02:11:56  Init:      Initializing /usr/share/freecad-daily/Mod/Web... done
02:11:56  Init:      Initializing /usr/share/freecad-daily/Mod/Material... done
02:11:56  Init:      Initializing /usr/share/freecad-daily/Mod/Spreadsheet... done
02:11:56  Init:      Initializing /usr/share/freecad-daily/Mod/Mesh... done
02:11:56  Init:      Initializing /usr/share/freecad-daily/Mod/Inspection... done
02:11:57  Init:      Initializing /usr/share/freecad-daily/Mod/Test... done
02:11:57  Init:      Initializing /usr/share/freecad-daily/Mod/Fem... done
02:11:57  Init:      Initializing /usr/share/freecad-daily/Mod/Path... done
02:11:57  Init:      Initializing /usr/share/freecad-daily/Mod/MeshPart... done
02:11:57  Module: Part
02:11:57  Loading Part module... done
02:11:58  Init:      Initializing /home/worker/.FreeCAD/Mod/A2plus... done
02:11:58  Init:      Initializing /home/worker/.FreeCAD/Mod/DynamicData... done
02:11:58  Init:      Initializing /home/worker/.FreeCAD/Mod/sheetmetal... done
02:11:58  Init:      Initializing /home/worker/.FreeCAD/Mod/Manipulator... done
02:11:58  Init:      Initializing /home/worker/.FreeCAD/Mod/Render... done
[color=#FF0000]02:11:58  Init:      Initializing /home/worker/.FreeCAD/Mod/BCFPlugin(InitGui.py not found)... ignore[/color]
02:11:58  Init:      Initializing /home/worker/.FreeCAD/Mod/lattice2... done
02:11:59  Init:      Initializing /home/worker/.FreeCAD/Mod/dodo... done
02:11:59  PartOMagic failed to detect FC version number: revision is zero / too low, minor version is unexpected.Loading GUI of Part module... done
02:11:59  Loading Sketcher module... done
02:11:59  Loading GUI of Sketcher module... done
02:11:59  Loading GUI of PartDesign module... done
02:12:01  Init:      Initializing /home/worker/.FreeCAD/Mod/Part-o-magic... done
[color=#FF0000]02:12:01  Init:      Initializing /home/worker/.FreeCAD/Mod/BIMBots(InitGui.py not found)... ignore[/color]
02:12:01  Init:      Initializing /home/worker/.FreeCAD/Mod/BIM... done
02:12:01  Init:      Initializing /home/worker/.FreeCAD/Mod/Assembly4... done
02:12:01  Init:      Initializing /home/worker/.FreeCAD/Mod/fasteners... done
[color=#FF0000]02:12:01  Init:      Initializing /home/worker/.FreeCAD/Mod/symbols_library(InitGui.py not found)... ignore[/color]
02:12:01  Init:      Initializing /home/worker/.FreeCAD/Mod/CADExchanger... done
02:12:01  Init:      Initializing /home/worker/.FreeCAD/Mod/Reporting... done
[color=#FF0000]02:12:01  Init:      Initializing /home/worker/.FreeCAD/Mod/SelectorToolbar(InitGui.py not found)... ignore
02:12:01  Init:      Initializing /home/worker/.FreeCAD/Mod/SlopedPlanesMacro(InitGui.py not found)... ignore[/color]
02:12:01  Init:      Initializing /home/worker/.FreeCAD/Mod/ThreadProfile... done
[color=#FF0000]02:12:02  Init:      Initializing /home/worker/.FreeCAD/Mod/BOLTSFC(InitGui.py not found)... ignore[/color]
02:12:02  Init: Loading FreeCAD GUI
02:12:02  Init: Running FreeCADGuiInit.py start script... done
02:12:03  Init: Activating default workbench StartWorkbench
02:12:03  Loading GUI of Web module... done
02:12:03  Loading GUI of Start module... done
02:12:03  Loading Start module... done
[color=#FF0000]02:12:03  libpng warning: iCCP: known incorrect sRGB profile
02:12:03  libpng warning: iCCP: known incorrect sRGB profile[/color]
02:12:03  Init: Showing main window
02:12:03  Main window restored
02:12:03  Show main window
02:12:03  Toolbars restored
[color=#FF0000]02:12:03  Couldn't connect to spacenav daemon[/color]
02:12:03  Init: Entering event loop
02:12:04  Init: Processing command line files
02:12:08  Loading Fem module... done
02:12:08  Loading GUI of Fem module... done[color=#FF0000]
02:12:08  <input>:66:16: Could not add child element to parent element because the types are incorrect.
02:12:08  <input>:78:369: Could not add child element to parent element because the types are incorrect.
02:12:08  <input>:78:462: Could not add child element to parent element because the types are incorrect.[/color]

###################################################
OS: Ubuntu 18.04.4 LTS (ubuntu:GNOME/ubuntu)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.
Build type: Release
Branch: unknown
Hash: 0cf8279f00017ed2913e0c17beda77c733f98350
Python version: 3.6.9
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 10 guests