3d pocker troubles

Here's the place for discussion related to CAM/CNC and the development of the Path module.
Post Reply
User avatar
xf3qc
Posts: 38
Joined: Fri Aug 04, 2017 5:29 pm

3d pocker troubles

Post by xf3qc » Sun Aug 02, 2020 6:15 am

using 0.19 now., but always got this same issue, when making a 3d pocket,
only a limited cross section is generated, not starting at top, nor reaching bottom.
Attachments
base.FCStd
(37.2 KiB) Downloaded 4 times
Screenshot_2020-08-02_02-12-44.png
Screenshot_2020-08-02_02-12-44.png (45.62 KiB) Viewed 151 times
chrisb
Posts: 25698
Joined: Tue Mar 17, 2015 9:14 am

Re: 3d pocker troubles

Post by chrisb » Sun Aug 02, 2020 8:22 am

Please add your full FreeCAD infos. We don't even know which OS you use.
herbk
Posts: 1844
Joined: Mon Nov 03, 2014 3:45 pm
Location: Windsbach, Bavarya (Germany)

Re: 3d pocker troubles

Post by herbk » Sun Aug 02, 2020 9:14 am

Hi,
if you use 3D Pocket OP your part have to have a bottom, so you have to ad a helper pad.
3d_pocket.jpg
3d_pocket.jpg (95.76 KiB) Viewed 132 times
Attachments
base_herbk.FCStd
(47.65 KiB) Downloaded 3 times
Gruß Herbert
User avatar
xf3qc
Posts: 38
Joined: Fri Aug 04, 2017 5:29 pm

Re: 3d pocker troubles

Post by xf3qc » Sun Aug 02, 2020 8:37 pm

chrisb wrote:
Sun Aug 02, 2020 8:22 am
Please add your full FreeCAD infos. We don't even know which OS you use.
will mention from now.

0.19 Revison 22044 with your fix - pull/3706

had this issue with 3d pockets in all versions, should have asked earlier :x

Thank you herbk!
Going to try again now.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest