[SOLVED] Error when postprocessing a simulation containing a *SPRING card¶

About the development of the FEM module/workbench.

Moderator: bernd

johnwang
Posts: 348
Joined: Sun Jan 27, 2019 12:41 am

Re: [FC error] Error when postprocessing a simulation containing a *SPRING card¶

Postby johnwang » Wed Jul 01, 2020 2:50 am

Where is the SPRING now? :D
User avatar
bernd
Posts: 10184
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

Re: [FC error] Error when postprocessing a simulation containing a *SPRING card¶

Postby bernd » Wed Jul 01, 2020 4:32 am

The mesh has two edges, I assume these are the springs. As you know from other topic mesh ViewOrovider does not supoort mixed meshes, thus they are bot explizit shown. But with Python you can "see" them.
EkaitzEsteban
Posts: 108
Joined: Wed Sep 12, 2018 1:31 pm

Re: [SOLVED] Error when postprocessing a simulation containing a *SPRING card¶

Postby EkaitzEsteban » Wed Jul 01, 2020 4:54 am

Thank you johnwang
EkaitzEsteban
Posts: 108
Joined: Wed Sep 12, 2018 1:31 pm

Re: [FC error] Error when postprocessing a simulation containing a *SPRING card¶

Postby EkaitzEsteban » Wed Jul 01, 2020 7:47 am

johnwang wrote:
Wed Jul 01, 2020 2:47 am
bernd wrote:
Tue Jun 30, 2020 5:27 pm
git commit c4b06353614d
Great.

Just figured out how to update.
1. Click this link
2. Click the ...
3. Click View file
4. Click Raw
5. Right Click, Save as to the folder where it should be to replace the old one.

mt.jpg

mt2.jpg
It works perfectly. I just replace the last function

Code: Select all

def compact_mesh
in ...\FreeCAD 0.18\Mod\Fem\femmesh\meshtools.py (I am using the FC version 0.18).

Then, I open the frd file containing the results of Calculix and I postprocess the results in FC.

best regards,
Ekaitz.
johnwang
Posts: 348
Joined: Sun Jan 27, 2019 12:41 am

Re: [SOLVED] Error when postprocessing a simulation containing a *SPRING card¶

Postby johnwang » Wed Jul 01, 2020 9:55 am

Use 0.19 please.
User avatar
bernd
Posts: 10184
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

Re: [SOLVED] Error when postprocessing a simulation containing a *SPRING card¶

Postby bernd » Wed Jul 01, 2020 10:07 am