Multiple workbench failures

[liquibyte]

Fresh emerge freecad on Gentoo. I don't even know where to start with this but it basically makes the program unusable. This is going to be a multi-post post because the errors are long.

Code: Select all

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib/python3.9/unittest/loader.py", line 34, in testFailure
    raise self._exception
ImportError: Failed to import test module: TestPartDesignApp
Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/loader.py", line 154, in loadTestsFromName
    module = __import__(module_name)
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/PartDesign/TestPartDesignApp.py", line 31, in <module>
    from PartDesignTests.TestPad import TestPad
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/PartDesign/PartDesignTests/TestPad.py", line 24, in <module>
    import TestSketcherApp
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Sketcher/TestSketcherApp.py", line 24, in <module>
    from SketcherTests.TestSketcherSolver import TestSketcherSolver
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Sketcher/SketcherTests/TestSketcherSolver.py", line 23, in <module>
    import FreeCAD, os, sys, unittest, Part, Sketcher
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib/python3.9/unittest/loader.py", line 34, in testFailure
    raise self._exception
ImportError: Failed to import test module: TestPathApp
Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/loader.py", line 154, in loadTestsFromName
    module = __import__(module_name)
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Path/TestPathApp.py", line 26, in <module>
    from PathTests.TestPathPreferences  import TestPathPreferences
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Path/PathTests/TestPathPreferences.py", line 24, in <module>
    import PathTests.PathTestUtils as PathTestUtils
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Path/PathTests/PathTestUtils.py", line 24, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib/python3.9/unittest/loader.py", line 34, in testFailure
    raise self._exception
ImportError: Failed to import test module: TestSpreadsheet
Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/loader.py", line 154, in loadTestsFromName
    module = __import__(module_name)
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Spreadsheet/TestSpreadsheet.py", line 27, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib/python3.9/unittest/loader.py", line 34, in testFailure
    raise self._exception
ImportError: Failed to import test module: TestPartApp
Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/loader.py", line 154, in loadTestsFromName
    module = __import__(module_name)
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Part/TestPartApp.py", line 22, in <module>
    import FreeCAD, unittest, Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib/python3.9/unittest/loader.py", line 34, in testFailure
    raise self._exception
ImportError: Failed to import test module: TestFemApp
Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/loader.py", line 154, in loadTestsFromName
    module = __import__(module_name)
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/TestFemApp.py", line 33, in <module>
    from femtest.app.test_mesh import TestMeshCommon as FemTest07
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femtest/app/test_mesh.py", line 33, in <module>
    import Fem
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib/python3.9/unittest/loader.py", line 34, in testFailure
    raise self._exception
ImportError: Failed to import test module: TestDraft
Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/loader.py", line 154, in loadTestsFromName
    module = __import__(module_name)
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/TestDraft.py", line 101, in <module>
    from drafttests.test_creation import DraftCreation as DraftTest02
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/drafttests/test_creation.py", line 34, in <module>
    import Draft
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/Draft.py", line 140, in <module>
    from draftfunctions.draftify import draftify
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftfunctions/draftify.py", line 37, in <module>
    import draftmake.make_circle as make_circle
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftmake/make_circle.py", line 33, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib/python3.9/unittest/loader.py", line 34, in testFailure
    raise self._exception
ImportError: Failed to import test module: TestSketcherApp
Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/loader.py", line 154, in loadTestsFromName
    module = __import__(module_name)
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Sketcher/TestSketcherApp.py", line 24, in <module>
    from SketcherTests.TestSketcherSolver import TestSketcherSolver
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Sketcher/SketcherTests/TestSketcherSolver.py", line 23, in <module>
    import FreeCAD, os, sys, unittest, Part, Sketcher
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib/python3.9/unittest/loader.py", line 34, in testFailure
    raise self._exception
ImportError: Failed to import test module: TestTechDrawApp
Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/loader.py", line 154, in loadTestsFromName
    module = __import__(module_name)
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/TechDraw/TestTechDrawApp.py", line 23, in <module>
    import FreeCAD, os, sys, unittest, Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib/python3.9/unittest/loader.py", line 34, in testFailure
    raise self._exception
ImportError: Failed to import test module: TestPartDesignGui
Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/loader.py", line 154, in loadTestsFromName
    module = __import__(module_name)
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/PartDesign/TestPartDesignGui.py", line 27, in <module>
    import Sketcher
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib/python3.9/unittest/loader.py", line 34, in testFailure
    raise self._exception
ImportError: Failed to import test module: TestPartGui
Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/loader.py", line 154, in loadTestsFromName
    module = __import__(module_name)
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Part/TestPartGui.py", line 22, in <module>
    import FreeCAD, FreeCADGui, os, sys, unittest, Part, PartGui
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

Traceback (most recent call last):
  File "/usr/lib64/freecad/Mod/Test/Workbench.py", line 41, in testActivate
    self.assertTrue(success, "Test on activating workbench {0} failed".format(i))
  File "/usr/lib/python3.9/unittest/case.py", line 682, in assertTrue
    raise self.failureException(msg)
AssertionError: False is not true : Test on activating workbench PartDesignWorkbench failed

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib64/freecad/Mod/Test/Workbench.py", line 44, in testActivate
    self.fail("Loading of workbench '{0}' failed: {1}".format(i, e))
  File "/usr/lib/python3.9/unittest/case.py", line 670, in fail
    raise self.failureException(msg)
AssertionError: Loading of workbench 'PartDesignWorkbench' failed: False is not true : Test on activating workbench PartDesignWorkbench failed

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib64/freecad/Mod/Fem/femtest/gui/test_open.py", line 142, in test_femobjects_open_de9b3fb438
    self.compare_feature_pythons_class_gui(self.document)
  File "/usr/lib64/freecad/Mod/Fem/femtest/gui/test_open.py", line 158, in compare_feature_pythons_class_gui
    from femviewprovider.view_constraint_bodyheatsource import VPConstraintBodyHeatSource
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_constraint_bodyheatsource.py", line 33, in <module>
    from . import view_base_femconstraint
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_base_femconstraint.py", line 35, in <module>
    from femviewprovider import view_base_femobject
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib64/freecad/Mod/Fem/femtest/gui/test_open.py", line 107, in test_femobjects_open_head
    self.document = create_all_fem_objects_doc(self.document)
  File "/usr/lib64/freecad/Mod/Fem/femtest/app/test_object.py", line 1577, in create_all_fem_objects_doc
    analysis = ObjectsFem.makeAnalysis(doc)
  File "/usr/lib64/freecad/Mod/Fem/ObjectsFem.py", line 55, in makeAnalysis
    obj = doc.addObject("Fem::FemAnalysis", name)
ImportError: {'sclassname': 'N4Base11PyExceptionE', 'sErrMsg': '/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib', 'sfile': '', 'iline': 0, 'sfunction': '', 'swhat': '/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib', 'btranslatable': False, 'breported': True}

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib/python3.9/unittest/loader.py", line 34, in testFailure
    raise self._exception
ImportError: Failed to import test module: TestArch
Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/loader.py", line 154, in loadTestsFromName
    module = __import__(module_name)
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Arch/TestArch.py", line 31, in <module>
    import Arch
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Arch/Arch.py", line 41, in <module>
    from ArchWall import *
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Arch/ArchWall.py", line 32, in <module>
    import FreeCAD,Draft,ArchComponent,DraftVecUtils,ArchCommands,math
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/Draft.py", line 140, in <module>
    from draftfunctions.draftify import draftify
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftfunctions/draftify.py", line 37, in <module>
    import draftmake.make_circle as make_circle
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftmake/make_circle.py", line 33, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib64/freecad/Mod/Draft/drafttests/test_import_gui.py", line 58, in test_import_gui_draft_snap
    self.assertTrue(imported, "Problem importing '{}'".format(module))
  File "/usr/lib/python3.9/unittest/case.py", line 682, in assertTrue
    raise self.failureException(msg)
AssertionError: False is not true : Problem importing 'draftguitools.gui_snapper'

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib64/freecad/Mod/Draft/drafttests/test_import_gui.py", line 64, in test_import_gui_draft_tools
    self.assertTrue(imported, "Problem importing '{}'".format(module))
  File "/usr/lib/python3.9/unittest/case.py", line 682, in assertTrue
    raise self.failureException(msg)
AssertionError: False is not true : Problem importing 'DraftTools'

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib64/freecad/Mod/Draft/drafttests/test_import_gui.py", line 70, in test_import_gui_draft_trackers
    self.assertTrue(imported, "Problem importing '{}'".format(module))
  File "/usr/lib/python3.9/unittest/case.py", line 682, in assertTrue
    raise self.failureException(msg)
AssertionError: False is not true : Problem importing 'draftguitools.gui_trackers'

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib64/freecad/Mod/Draft/drafttests/test_import_gui.py", line 52, in test_import_gui_draftgui
    self.assertTrue(imported, "Problem importing '{}'".format(module))
  File "/usr/lib/python3.9/unittest/case.py", line 682, in assertTrue
    raise self.failureException(msg)
AssertionError: False is not true : Problem importing 'DraftGui'

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib64/freecad/Mod/Draft/drafttests/test_import_tools.py", line 52, in test_import_gui_draftedit
    self.assertTrue(imported, "Problem importing '{}'".format(module))
  File "/usr/lib/python3.9/unittest/case.py", line 682, in assertTrue
    raise self.failureException(msg)
AssertionError: False is not true : Problem importing 'draftguitools.gui_edit'

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib64/freecad/Mod/Draft/drafttests/test_import_tools.py", line 64, in test_import_gui_draftplane
    self.assertTrue(imported, "Problem importing '{}'".format(module))
  File "/usr/lib/python3.9/unittest/case.py", line 682, in assertTrue
    raise self.failureException(msg)
AssertionError: False is not true : Problem importing 'draftguitools.gui_selectplane'

Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/case.py", line 59, in testPartExecutor
    yield
  File "/usr/lib/python3.9/unittest/case.py", line 593, in run
    self._callTestMethod(testMethod)
  File "/usr/lib/python3.9/unittest/case.py", line 550, in _callTestMethod
    method()
  File "/usr/lib/python3.9/unittest/loader.py", line 34, in testFailure
    raise self._exception
ImportError: Failed to import test module: TestSketcherGui
Traceback (most recent call last):
  File "/usr/lib/python3.9/unittest/loader.py", line 154, in loadTestsFromName
    module = __import__(module_name)
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Sketcher/TestSketcherGui.py", line 22, in <module>
    import FreeCAD, FreeCADGui, os, sys, unittest, Sketcher, SketcherGui
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

[liquibyte]

Part two.

Code: Select all

17:44:49  Wizard shaft module cannot be loaded
17:44:49  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:44:49  Traceback (most recent call last):
  File "<string>", line 53, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:46:24  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:46:24  Traceback (most recent call last):
  File "<string>", line 52, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/DraftTools.py", line 49, in <module>
    import Draft
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/Draft.py", line 140, in <module>
    from draftfunctions.draftify import draftify
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftfunctions/draftify.py", line 37, in <module>
    import draftmake.make_circle as make_circle
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftmake/make_circle.py", line 33, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:46:30  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEvError: Initializing one or more of the Draft modules failed, Draft will not work as expected.
17:46:30  Unknown command 'Draft_Line'
17:46:30  Unknown command 'Draft_Wire'
17:46:30  Unknown command 'Draft_Fillet'
17:46:30  Unknown command 'Draft_ArcTools'
17:46:30  Unknown command 'Draft_Circle'
17:46:30  Unknown command 'Draft_Ellipse'
17:46:30  Unknown command 'Draft_Rectangle'
17:46:30  Unknown command 'Draft_Polygon'
17:46:30  Unknown command 'Draft_BSpline'
17:46:30  Unknown command 'Draft_BezierTools'
17:46:30  Unknown command 'Draft_Point'
17:46:30  Unknown command 'Draft_Facebinder'
17:46:30  Unknown command 'Draft_ShapeString'
17:46:30  Unknown command 'Draft_Text'
17:46:30  Unknown command 'Draft_Dimension'
17:46:30  Unknown command 'Draft_Label'
17:46:30  Unknown command 'Draft_AnnotationStyleEditor'
17:46:30  Unknown command 'Draft_Move'
17:46:30  Unknown command 'Draft_Rotate'
17:46:30  Unknown command 'Draft_Scale'
17:46:30  Unknown command 'Draft_Mirror'
17:46:30  Unknown command 'Draft_Offset'
17:46:30  Unknown command 'Draft_Trimex'
17:46:30  Unknown command 'Draft_Stretch'
17:46:30  Unknown command 'Draft_Clone'
17:46:30  Unknown command 'Draft_ArrayTools'
17:46:30  Unknown command 'Draft_Edit'
17:46:30  Unknown command 'Draft_SubelementHighlight'
17:46:30  Unknown command 'Draft_Join'
17:46:30  Unknown command 'Draft_Split'
17:46:30  Unknown command 'Draft_Upgrade'
17:46:30  Unknown command 'Draft_Downgrade'
17:46:30  Unknown command 'Draft_WireToBSpline'
17:46:30  Unknown command 'Draft_Draft2Sketch'
17:46:30  Unknown command 'Draft_Slope'
17:46:30  Unknown command 'Draft_FlipDimension'
17:46:30  Unknown command 'Draft_Shape2DView'
17:46:30  Unknown command 'Draft_Layer'
17:46:30  Unknown command 'Draft_WorkingPlaneProxy'
17:46:30  Unknown command 'Draft_ToggleDisplayMode'
17:46:30  Unknown command 'Draft_AddToGroup'
17:46:30  Unknown command 'Draft_SelectGroup'
17:46:30  Unknown command 'Draft_AddConstruction'
17:46:30  Unknown command 'Draft_Heal'
17:46:30  Unknown command 'Draft_Line'
17:46:30  Unknown command 'Draft_Wire'
17:46:30  Unknown command 'Draft_Fillet'
17:46:30  Unknown command 'Draft_ArcTools'
17:46:30  Unknown command 'Draft_Circle'
17:46:30  Unknown command 'Draft_Ellipse'
17:46:30  Unknown command 'Draft_Rectangle'
17:46:30  Unknown command 'Draft_Polygon'
17:46:30  Unknown command 'Draft_BSpline'
17:46:30  Unknown command 'Draft_BezierTools'
17:46:30  Unknown command 'Draft_Point'
17:46:30  Unknown command 'Draft_Facebinder'
17:46:30  Unknown command 'Draft_ShapeString'
17:46:30  Unknown command 'Draft_Text'
17:46:30  Unknown command 'Draft_Dimension'
17:46:30  Unknown command 'Draft_Label'
17:46:30  Unknown command 'Draft_AnnotationStyleEditor'
17:46:30  Unknown command 'Draft_Move'
17:46:30  Unknown command 'Draft_Rotate'
17:46:30  Unknown command 'Draft_Scale'
17:46:30  Unknown command 'Draft_Mirror'
17:46:30  Unknown command 'Draft_Offset'
17:46:30  Unknown command 'Draft_Trimex'
17:46:30  Unknown command 'Draft_Stretch'
17:46:30  Unknown command 'Draft_Clone'
17:46:30  Unknown command 'Draft_ArrayTools'
17:46:30  Unknown command 'Draft_Edit'
17:46:30  Unknown command 'Draft_SubelementHighlight'
17:46:30  Unknown command 'Draft_Join'
17:46:30  Unknown command 'Draft_Split'
17:46:30  Unknown command 'Draft_Upgrade'
17:46:30  Unknown command 'Draft_Downgrade'
17:46:30  Unknown command 'Draft_WireToBSpline'
17:46:30  Unknown command 'Draft_Draft2Sketch'
17:46:30  Unknown command 'Draft_Slope'
17:46:30  Unknown command 'Draft_FlipDimension'
17:46:30  Unknown command 'Draft_Shape2DView'
17:46:30  Unknown command 'Draft_Layer'
17:46:30  Unknown command 'Draft_Heal'
17:46:30  Unknown command 'Draft_FlipDimension'
17:46:30  Unknown command 'Draft_ToggleConstructionMode'
17:46:30  Unknown command 'Draft_ToggleContinueMode'
17:46:30  Unknown command 'Draft_Edit'
17:46:30  Unknown command 'Draft_Slope'
17:46:30  Unknown command 'Draft_WorkingPlaneProxy'
17:46:30  Unknown command 'Draft_AddConstruction'
17:46:30  Unknown command 'Draft_ApplyStyle'
17:46:30  Unknown command 'Draft_ToggleDisplayMode'
17:46:30  Unknown command 'Draft_AddToGroup'
17:46:30  Unknown command 'Draft_SelectGroup'
17:46:30  Unknown command 'Draft_SelectPlane'
17:46:30  Unknown command 'Draft_ShowSnapBar'
17:46:30  Unknown command 'Draft_ToggleGrid'
17:46:30  Unknown command 'Draft_AutoGroup'
17:46:30  Unknown command 'Draft_SetStyle'
17:46:35  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:46:35  Traceback (most recent call last):
  File "<string>", line 43, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:46:38  /usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib
17:46:38  Traceback (most recent call last):
  File "<string>", line 72, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:46:43  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:46:43  Traceback (most recent call last):
  File "<string>", line 43, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:46:46  Traceback (most recent call last):
  File "<string>", line 1, in <module>
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/MeshPart/MeshFlatteningCommand.py", line 4, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
<class 'ImportError'>: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:46:48  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:46:48  Traceback (most recent call last):
  File "<string>", line 50, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/OpenSCAD/OpenSCADCommands.py", line 32, in <module>
    import OpenSCADUtils
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/OpenSCAD/OpenSCADUtils.py", line 31, in <module>
    from exportCSG import mesh2polyhedron
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/OpenSCAD/exportCSG.py", line 32, in <module>
    import FreeCAD, os, Part, math
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:46:51  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:46:51  Traceback (most recent call last):
  File "<string>", line 43, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:46:54  Wizard shaft module cannot be loaded
17:46:54  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:46:54  Traceback (most recent call last):
  File "<string>", line 53, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:46:57  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:46:57  Traceback (most recent call last):
  File "<string>", line 60, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Path/PathScripts/PathPreferencesPathJob.py", line 24, in <module>
    import Path
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:47:02  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:47:02  Traceback (most recent call last):
  File "<string>", line 42, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:47:06  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:47:06  Traceback (most recent call last):
  File "<string>", line 41, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:47:09  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:47:09  Traceback (most recent call last):
  File "<string>", line 43, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:47:14  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:47:14  Traceback (most recent call last):
  File "<string>", line 43, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:47:16  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:47:16  Traceback (most recent call last):
  File "<string>", line 41, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:47:37  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:47:37  Traceback (most recent call last):
  File "<string>", line 43, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:48:27  Wizard shaft module cannot be loaded
17:48:27  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:48:27  Traceback (most recent call last):
  File "<string>", line 53, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:48:40  /usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib
17:48:40  Traceback (most recent call last):
  File "<string>", line 72, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:50:08  Unknown command 'Draft_Line'
17:50:08  Unknown command 'Draft_Wire'
17:50:08  Unknown command 'Draft_Fillet'
17:50:08  Unknown command 'Draft_ArcTools'
17:50:08  Unknown command 'Draft_Circle'
17:50:08  Unknown command 'Draft_Ellipse'
17:50:08  Unknown command 'Draft_Rectangle'
17:50:08  Unknown command 'Draft_Polygon'
17:50:08  Unknown command 'Draft_BSpline'
17:50:08  Unknown command 'Draft_BezierTools'
17:50:08  Unknown command 'Draft_Point'
17:50:08  Unknown command 'Draft_Facebinder'
17:50:08  Unknown command 'Draft_ShapeString'
17:50:08  Unknown command 'Draft_Text'
17:50:08  Unknown command 'Draft_Dimension'
17:50:08  Unknown command 'Draft_Label'
17:50:08  Unknown command 'Draft_AnnotationStyleEditor'
17:50:08  Unknown command 'Draft_Move'
17:50:08  Unknown command 'Draft_Rotate'
17:50:08  Unknown command 'Draft_Scale'
17:50:08  Unknown command 'Draft_Mirror'
17:50:08  Unknown command 'Draft_Offset'
17:50:08  Unknown command 'Draft_Trimex'
17:50:08  Unknown command 'Draft_Stretch'
17:50:08  Unknown command 'Draft_Clone'
17:50:08  Unknown command 'Draft_ArrayTools'
17:50:08  Unknown command 'Draft_Edit'
17:50:08  Unknown command 'Draft_SubelementHighlight'
17:50:08  Unknown command 'Draft_Join'
17:50:08  Unknown command 'Draft_Split'
17:50:08  Unknown command 'Draft_Upgrade'
17:50:08  Unknown command 'Draft_Downgrade'
17:50:08  Unknown command 'Draft_WireToBSpline'
17:50:08  Unknown command 'Draft_Draft2Sketch'
17:50:08  Unknown command 'Draft_Slope'
17:50:08  Unknown command 'Draft_FlipDimension'
17:50:08  Unknown command 'Draft_Shape2DView'
17:50:08  Unknown command 'Draft_Layer'
17:50:08  Unknown command 'Draft_WorkingPlaneProxy'
17:50:08  Unknown command 'Draft_ToggleDisplayMode'
17:50:08  Unknown command 'Draft_AddToGroup'
17:50:08  Unknown command 'Draft_SelectGroup'
17:50:08  Unknown command 'Draft_AddConstruction'
17:50:08  Unknown command 'Draft_Heal'
17:50:08  Unknown command 'Draft_Line'
17:50:08  Unknown command 'Draft_Wire'
17:50:08  Unknown command 'Draft_Fillet'
17:50:08  Unknown command 'Draft_ArcTools'
17:50:08  Unknown command 'Draft_Circle'
17:50:08  Unknown command 'Draft_Ellipse'
17:50:08  Unknown command 'Draft_Rectangle'
17:50:08  Unknown command 'Draft_Polygon'
17:50:08  Unknown command 'Draft_BSpline'
17:50:08  Unknown command 'Draft_BezierTools'
17:50:08  Unknown command 'Draft_Point'
17:50:08  Unknown command 'Draft_Facebinder'
17:50:08  Unknown command 'Draft_ShapeString'
17:50:08  Unknown command 'Draft_Text'
17:50:08  Unknown command 'Draft_Dimension'
17:50:08  Unknown command 'Draft_Label'
17:50:08  Unknown command 'Draft_AnnotationStyleEditor'
17:50:08  Unknown command 'Draft_Move'
17:50:08  Unknown command 'Draft_Rotate'
17:50:08  Unknown command 'Draft_Scale'
17:50:08  Unknown command 'Draft_Mirror'
17:50:08  Unknown command 'Draft_Offset'
17:50:08  Unknown command 'Draft_Trimex'
17:50:08  Unknown command 'Draft_Stretch'
17:50:08  Unknown command 'Draft_Clone'
17:50:08  Unknown command 'Draft_ArrayTools'
17:50:08  Unknown command 'Draft_Edit'
17:50:08  Unknown command 'Draft_SubelementHighlight'
17:50:08  Unknown command 'Draft_Join'
17:50:08  Unknown command 'Draft_Split'
17:50:08  Unknown command 'Draft_Upgrade'
17:50:08  Unknown command 'Draft_Downgrade'
17:50:08  Unknown command 'Draft_WireToBSpline'
17:50:08  Unknown command 'Draft_Draft2Sketch'
17:50:08  Unknown command 'Draft_Slope'
17:50:08  Unknown command 'Draft_FlipDimension'
17:50:08  Unknown command 'Draft_Shape2DView'
17:50:08  Unknown command 'Draft_Layer'
17:50:08  Unknown command 'Draft_Heal'
17:50:08  Unknown command 'Draft_FlipDimension'
17:50:08  Unknown command 'Draft_ToggleConstructionMode'
17:50:08  Unknown command 'Draft_ToggleContinueMode'
17:50:08  Unknown command 'Draft_Edit'
17:50:08  Unknown command 'Draft_Slope'
17:50:08  Unknown command 'Draft_WorkingPlaneProxy'
17:50:08  Unknown command 'Draft_AddConstruction'
17:50:08  Unknown command 'Draft_ApplyStyle'
17:50:08  Unknown command 'Draft_ToggleDisplayMode'
17:50:08  Unknown command 'Draft_AddToGroup'
17:50:08  Unknown command 'Draft_SelectGroup'
17:50:08  Unknown command 'Draft_SelectPlane'
17:50:08  Unknown command 'Draft_ShowSnapBar'
17:50:08  Unknown command 'Draft_ToggleGrid'
17:50:08  Unknown command 'Draft_AutoGroup'
17:50:08  Unknown command 'Draft_SetStyle'
17:50:16  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:50:16  Traceback (most recent call last):
  File "<string>", line 43, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:50:21  /usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib
17:50:21  Traceback (most recent call last):
  File "<string>", line 72, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:50:31  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:50:31  Traceback (most recent call last):
  File "<string>", line 43, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:50:47  Wizard shaft module cannot be loaded
17:50:47  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:50:47  Traceback (most recent call last):
  File "<string>", line 53, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:50:54  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:50:54  Traceback (most recent call last):
  File "<string>", line 43, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:51:11  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:51:11  Traceback (most recent call last):
  File "<string>", line 42, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:51:16  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:51:16  Traceback (most recent call last):
  File "<string>", line 41, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:51:20  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:51:20  Traceback (most recent call last):
  File "<string>", line 43, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:51:29  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:51:29  Traceback (most recent call last):
  File "<string>", line 43, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:51:33  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:51:33  Traceback (most recent call last):
  File "<string>", line 41, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:51:49  import TestFemImport
17:51:49  import TestObjectExistance
17:51:49  import TestFemCommon
17:51:49  import TestObjectCreate
17:51:49  import TestObjectType
17:51:49  import TestObjectOpen
17:51:49  import TestMaterialUnits
17:51:49  import TestObjectOpen
17:51:50  Write mesh to /tmp/mesh.stl
17:51:50  Create mesh instance
17:51:50  Create mesh instance
17:51:50  Mesh loaded successfully.
17:51:50  Mesh loaded successfully.
17:52:00  Create sphere (10.0,140)...
17:52:00  Create sphere (10.0,160)...
17:52:00  ... destroy sphere
17:52:00  ... destroy sphere
17:52:01  Polynomial: f(x,y)=0.333333*x^2+0.333333*y^2+0.000000*x*y+0.000000*x+0.000000*y-0.444444
17:52:01  Polynomial: f(x,y)=-1.775872*x^2+0.000000*y^2-0.000000*x*y+0.255864*x-0.000000*y+0.523170
17:52:01  Polynomial: f(x,y)=0.500000*x^2+0.500000*y^2+0.000000*x*y+0.000000*x+0.000000*y-0.666667
17:52:04  Call from Python thread (not synchronized): count=1
17:52:04  Call from Python thread (not synchronized): count=2
17:52:04  Call from Python thread (not synchronized): count=3
17:52:04  Call from Python thread (not synchronized): count=4
17:52:04  Call from Python thread (not synchronized): count=5
17:52:04  Call from Python thread (not synchronized): count=6
17:52:04  Call from Python thread (not synchronized): count=7
17:52:04  Call from Python thread (not synchronized): count=8
17:52:04  Call from Python thread (not synchronized): count=9
17:52:04  Call from Python thread (not synchronized): count=10
17:52:04  10
17:52:04     Printing message
17:52:04     Printing error
17:52:04     Printing warning
17:52:07  Call from Python thread: count=1
17:52:07  Call from Python thread: count=2
17:52:07  Call from Python thread: count=3
17:52:07  Call from Python thread: count=4
17:52:07  Call from Python thread: count=5
17:52:07  Call from Python thread: count=6
17:52:07  Call from Python thread: count=7
17:52:07  Call from Python thread: count=8
17:52:07  Call from Python thread: count=9
17:52:07  Call from Python thread: count=10
17:52:07  10
17:52:07  10.0 mm  :  9.524999999999999 mm  :  ('3/8"', 25.4, 'in')  :  CentiMetre  :  Building US (ft-in/sqft/cft)
17:52:07  100.0 mm  :  98.425 mm  :  ('3+7/8"', 25.4, 'in')  :  DeciMetre  :  Building US (ft-in/sqft/cft)
17:52:07  1000000.0 mm  :  1000001.175 mm  :  ('3280\' 10+1/8"', 25.4, 'in')  :  KiloMetre  :  Building US (ft-in/sqft/cft)
17:52:07  1000.0 mm  :  1000.1250000000001 mm  :  ('3\' 3+3/8"', 25.4, 'in')  :  Metre  :  Building US (ft-in/sqft/cft)
17:52:07  1e-12 s^3*A^2/(mm^2*kg)  :  1.0  :  ('1.0000000000000000 µS', 1e-12, 'µS')  :  MicroSiemens  :  Standard (mm/kg/s/degree)
17:52:08  1e-12 s^3*A^2/(mm^2*kg)  :  1.0  :  ('1.0000000000000000 µS', 1e-12, 'µS')  :  MicroSiemens  :  MKS (m/kg/s/degree)
17:52:08  1.0 mm  :  0.0  :  ('0', 25.4, 'in')  :  MilliMetre  :  Building US (ft-in/sqft/cft)
17:52:08  0.0254 mm  :  0.0  :  ('0', 25.4, 'in')  :  Thou  :  Building US (ft-in/sqft/cft)
17:52:08  <Exception> 'one' is not part of the enumeration
17:52:09  <Exception> 'SurelyNotInThere!' is not part of the enumeration
17:52:10  <Exception> Object can only be in a single GeoFeatureGroup
17:52:10  <Exception> Object can only be in a single Group
17:52:10  App::FeatureTest / Fusion: Links go out of the allowed scope
17:52:10  App::FeatureTest / Fusion: Links go out of the allowed scope
17:52:10  4.6e-08 <App> Document.cpp(3172): The graph must be a DAG.
17:52:10  0.000322428 <App> Document.cpp(3527): GroupTests#Part2 still touched after recompute
17:52:10  <Exception> Object can only be in a single GeoFeatureGroup
17:52:12  <App::FeatureTest object>
17:52:12  <App::FeatureTest object>
17:52:12  <App::FeatureTest object>
17:52:12  <App::FeatureTest object>
17:52:12  <App::FeatureTest object>
17:52:12  <App::FeatureTest object>
17:52:12  <App::FeatureTest object>
17:52:12  <App::FeatureTest object>
17:52:12  <App::FeatureTest object>
17:52:12  <App::FeatureTest object>
17:52:12  <App::FeatureTest object>
17:52:12  Document with the UUID '0453f4a4-fd60-4378-ac29-c3e0dd2d9e45' already exists, change to '99101bb3-472d-45e7-a1ca-6197e99b75a1'
17:52:24  Wizard shaft module cannot be loaded
17:52:24  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:52:24  Traceback (most recent call last):
  File "<string>", line 53, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:52:36
****************************************************************************************************
********** run FEM TestObjectOpen tests ************************************************************
****************************************************************************************************
17:52:48  load old document objects
17:52:48  Cannot create object 'Analysis': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintBearing': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintBodyHeatSource': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintContact': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintDisplacement': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintElectrostaticPotential': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintFixed': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintFlowVelocity': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintFluidBoundary': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintForce': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintGear': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintHeatflux': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintInitialFlowVelocity': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintInitialTemperature': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintPlaneRotation': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintPressure': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintPulley': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintSelfWeight': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintTemperature': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintTie': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ConstraintTransform': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ElementFluid1D': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ElementGeometry1D': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ElementGeometry2D': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ElementRotation1D': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'MaterialMechanicalNonlinear': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'MeshGmsh': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'MeshBoundaryLayer': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'MeshGroup': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'MeshRegion': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'MeshNetgen': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'MeshResult': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'ResultMechanical': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'VtkResult': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'VtkFilterClipRegion': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'VtkFilterClipScalar': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'VtkFilterCutFunction': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'VtkFilterWarp': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'SolverCcxTools': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'SolverCalculix': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'SolverElmer': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Cannot create object 'SolverZ88': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:52:48  Traceback (most recent call last):
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femguiutils/migrate_gui.py", line 161, in exec_module
    return self.load_module(module)
  File "/usr/lib64/freecad/Mod/Fem/femguiutils/migrate_gui.py", line 208, in load_module
    import femviewprovider.view_material_common
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_material_common.py", line 37, in <module>
    from . import view_base_femconstraint
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_base_femconstraint.py", line 35, in <module>
    from femviewprovider import view_base_femobject
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_base_femobject.py", line 38, in <module>
    import FemGui  # needed to display the icons in TreeView
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
<class 'ImportError'>: /usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib
17:52:48  Traceback (most recent call last):
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femguiutils/migrate_gui.py", line 161, in exec_module
    return self.load_module(module)
  File "/usr/lib64/freecad/Mod/Fem/femguiutils/migrate_gui.py", line 208, in load_module
    import femviewprovider.view_material_common
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_material_common.py", line 37, in <module>
    from . import view_base_femconstraint
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_base_femconstraint.py", line 35, in <module>
    from femviewprovider import view_base_femobject
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_base_femobject.py", line 38, in <module>
    import FemGui  # needed to display the icons in TreeView
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
<class 'ImportError'>: /usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib
17:52:48  Traceback (most recent call last):
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femguiutils/migrate_gui.py", line 161, in exec_module
    return self.load_module(module)
  File "/usr/lib64/freecad/Mod/Fem/femguiutils/migrate_gui.py", line 215, in load_module
    import femviewprovider.view_material_reinforced
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_material_reinforced.py", line 33, in <module>
    from . import view_base_femconstraint
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_base_femconstraint.py", line 35, in <module>
    from femviewprovider import view_base_femobject
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_base_femobject.py", line 38, in <module>
    import FemGui  # needed to display the icons in TreeView
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
<class 'ImportError'>: /usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib
17:52:48  load master head document objects
17:52:48  Traceback (most recent call last):
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
<class 'ImportError'>: /usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib
17:52:48
17:52:48  ------------------------------------------------------------------------------
17:52:48    Try importing 'draftguitools.gui_snapper'
17:52:48    /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:52:48  Traceback (most recent call last):
  File "/usr/lib64/freecad/Mod/Draft/drafttests/auxiliary.py", line 46, in import_test
    imported = __import__("{}".format(module))
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftguitools/gui_snapper.py", line 47, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

[liquibyte]

Part three.

Code: Select all

17:52:49
17:52:49  ------------------------------------------------------------------------------
17:52:49    Try importing 'DraftTools'
17:52:49    /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:52:49  Traceback (most recent call last):
  File "/usr/lib64/freecad/Mod/Draft/drafttests/auxiliary.py", line 46, in import_test
    imported = __import__("{}".format(module))
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/DraftTools.py", line 49, in <module>
    import Draft
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/Draft.py", line 140, in <module>
    from draftfunctions.draftify import draftify
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftfunctions/draftify.py", line 37, in <module>
    import draftmake.make_circle as make_circle
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftmake/make_circle.py", line 33, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

17:52:49
17:52:49  ------------------------------------------------------------------------------
17:52:49    Try importing 'draftguitools.gui_trackers'
17:52:49    /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:52:49  Traceback (most recent call last):
  File "/usr/lib64/freecad/Mod/Draft/drafttests/auxiliary.py", line 46, in import_test
    imported = __import__("{}".format(module))
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftguitools/gui_trackers.py", line 43, in <module>
    import Draft
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/Draft.py", line 140, in <module>
    from draftfunctions.draftify import draftify
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftfunctions/draftify.py", line 37, in <module>
    import draftmake.make_circle as make_circle
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftmake/make_circle.py", line 33, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

17:52:49
17:52:49  ------------------------------------------------------------------------------
17:52:49    Try importing 'DraftGui'
17:52:49    /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:52:49  Traceback (most recent call last):
  File "/usr/lib64/freecad/Mod/Draft/drafttests/auxiliary.py", line 46, in import_test
    imported = __import__("{}".format(module))
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/DraftGui.py", line 47, in <module>
    import Draft
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/Draft.py", line 140, in <module>
    from draftfunctions.draftify import draftify
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftfunctions/draftify.py", line 37, in <module>
    import draftmake.make_circle as make_circle
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftmake/make_circle.py", line 33, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

17:52:49
17:52:49  ------------------------------------------------------------------------------
17:52:49    Try importing 'draftguitools.gui_edit'
17:52:49    /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:52:49  Traceback (most recent call last):
  File "/usr/lib64/freecad/Mod/Draft/drafttests/auxiliary.py", line 46, in import_test
    imported = __import__("{}".format(module))
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftguitools/gui_edit.py", line 45, in <module>
    import draftguitools.gui_trackers as trackers
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftguitools/gui_trackers.py", line 43, in <module>
    import Draft
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/Draft.py", line 140, in <module>
    from draftfunctions.draftify import draftify
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftfunctions/draftify.py", line 37, in <module>
    import draftmake.make_circle as make_circle
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftmake/make_circle.py", line 33, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

17:52:49
17:52:49  ------------------------------------------------------------------------------
17:52:49    Try importing 'DraftLayer'
17:52:49
17:52:49  ------------------------------------------------------------------------------
17:52:49    Try importing 'draftguitools.gui_selectplane'
17:52:49    /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:52:49  Traceback (most recent call last):
  File "/usr/lib64/freecad/Mod/Draft/drafttests/auxiliary.py", line 46, in import_test
    imported = __import__("{}".format(module))
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftguitools/gui_selectplane.py", line 35, in <module>
    import Draft
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/Draft.py", line 140, in <module>
    from draftfunctions.draftify import draftify
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftfunctions/draftify.py", line 37, in <module>
    import draftmake.make_circle as make_circle
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftmake/make_circle.py", line 33, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

17:52:49
17:52:49  ------------------------------------------------------------------------------
17:52:49    Try importing 'WorkingPlane'
17:52:49
17:52:49  ------------------------------------------------------------------------------
17:52:49    Temporary document 'DraftPivy'
17:52:49    Draw cube
17:52:49    Adding cube to the active view scene
17:52:49
17:52:49  ------------------------------------------------------------------------------
17:52:49    Temporary document 'DraftPivy'
17:52:49    Try importing 'pivy.coin'
17:55:59  Call from Python thread (not synchronized): count=1
17:55:59  Call from Python thread (not synchronized): count=2
17:55:59  Call from Python thread (not synchronized): count=3
17:55:59  Call from Python thread (not synchronized): count=4
17:55:59  Call from Python thread (not synchronized): count=5
17:55:59  Call from Python thread (not synchronized): count=6
17:55:59  Call from Python thread (not synchronized): count=7
17:55:59  Call from Python thread (not synchronized): count=8
17:55:59  Call from Python thread (not synchronized): count=9
17:55:59  Call from Python thread (not synchronized): count=10
17:55:59  10
17:55:59     Printing message
17:55:59     Printing error
17:55:59     Printing warning
17:56:02  Call from Python thread: count=1
17:56:02  Call from Python thread: count=2
17:56:02  Call from Python thread: count=3
17:56:02  Call from Python thread: count=4
17:56:02  Call from Python thread: count=5
17:56:02  Call from Python thread: count=6
17:56:02  Call from Python thread: count=7
17:56:02  Call from Python thread: count=8
17:56:02  Call from Python thread: count=9
17:56:02  Call from Python thread: count=10
17:56:02  10
17:56:20  Write mesh to /tmp/mesh.stl
17:56:20  Create mesh instance
17:56:20  Create mesh instance
17:56:20  Mesh loaded successfully.
17:56:20  Mesh loaded successfully.
17:56:30  Create sphere (10.0,140)...
17:56:30  Create sphere (10.0,160)...
17:56:30  ... destroy sphere
17:56:30  ... destroy sphere
17:56:31  Polynomial: f(x,y)=0.333333*x^2+0.333333*y^2+0.000000*x*y+0.000000*x+0.000000*y-0.444444
17:56:31  Polynomial: f(x,y)=-1.775872*x^2+0.000000*y^2-0.000000*x*y+0.255864*x-0.000000*y+0.523170
17:56:31  Polynomial: f(x,y)=0.500000*x^2+0.500000*y^2+0.000000*x*y+0.000000*x+0.000000*y-0.666667
17:56:34  Call from Python thread (not synchronized): count=1
17:56:34  Call from Python thread (not synchronized): count=2
17:56:34  Call from Python thread (not synchronized): count=3
17:56:34  Call from Python thread (not synchronized): count=4
17:56:34  Call from Python thread (not synchronized): count=5
17:56:34  Call from Python thread (not synchronized): count=6
17:56:34  Call from Python thread (not synchronized): count=7
17:56:34  Call from Python thread (not synchronized): count=8
17:56:34  Call from Python thread (not synchronized): count=9
17:56:34  Call from Python thread (not synchronized): count=10
17:56:34  10
17:56:34     Printing message
17:56:34     Printing error
17:56:34     Printing warning
17:56:37  Call from Python thread: count=1
17:56:37  Call from Python thread: count=2
17:56:37  Call from Python thread: count=3
17:56:37  Call from Python thread: count=4
17:56:37  Call from Python thread: count=5
17:56:37  Call from Python thread: count=6
17:56:37  Call from Python thread: count=7
17:56:37  Call from Python thread: count=8
17:56:37  Call from Python thread: count=9
17:56:37  Call from Python thread: count=10
17:56:37  10
17:56:37  10.0 mm  :  9.524999999999999 mm  :  ('3/8"', 25.4, 'in')  :  CentiMetre  :  Building US (ft-in/sqft/cft)
17:56:37  100.0 mm  :  98.425 mm  :  ('3+7/8"', 25.4, 'in')  :  DeciMetre  :  Building US (ft-in/sqft/cft)
17:56:37  1000000.0 mm  :  1000001.175 mm  :  ('3280\' 10+1/8"', 25.4, 'in')  :  KiloMetre  :  Building US (ft-in/sqft/cft)
17:56:37  1000.0 mm  :  1000.1250000000001 mm  :  ('3\' 3+3/8"', 25.4, 'in')  :  Metre  :  Building US (ft-in/sqft/cft)
17:56:37  1e-12 s^3*A^2/(mm^2*kg)  :  1.0  :  ('1.0000000000000000 µS', 1e-12, 'µS')  :  MicroSiemens  :  Standard (mm/kg/s/degree)
17:56:37  1e-12 s^3*A^2/(mm^2*kg)  :  1.0  :  ('1.0000000000000000 µS', 1e-12, 'µS')  :  MicroSiemens  :  MKS (m/kg/s/degree)
17:56:37  1.0 mm  :  0.0  :  ('0', 25.4, 'in')  :  MilliMetre  :  Building US (ft-in/sqft/cft)
17:56:38  0.0254 mm  :  0.0  :  ('0', 25.4, 'in')  :  Thou  :  Building US (ft-in/sqft/cft)
17:56:38  <Exception> 'one' is not part of the enumeration
17:56:39  <Exception> 'SurelyNotInThere!' is not part of the enumeration
17:56:40  <Exception> Object can only be in a single GeoFeatureGroup
17:56:40  <Exception> Object can only be in a single Group
17:56:40  App::FeatureTest / Fusion: Links go out of the allowed scope
17:56:40  App::FeatureTest / Fusion: Links go out of the allowed scope
17:56:40  269.822 <App> Document.cpp(3172): The graph must be a DAG.
17:56:40  269.822 <App> Document.cpp(3527): GroupTests#Part1 still touched after recompute
17:56:40  <Exception> Object can only be in a single GeoFeatureGroup
17:56:42  <App::FeatureTest object>
17:56:42  <App::FeatureTest object>
17:56:42  <App::FeatureTest object>
17:56:42  <App::FeatureTest object>
17:56:42  <App::FeatureTest object>
17:56:42  <App::FeatureTest object>
17:56:42  <App::FeatureTest object>
17:56:42  <App::FeatureTest object>
17:56:42  <App::FeatureTest object>
17:56:42  <App::FeatureTest object>
17:56:42  <App::FeatureTest object>
17:56:42  Document with the UUID '50899ac0-98ba-4986-831d-d87b9007eadb' already exists, change to '19252e1c-e2c8-43f9-b7bc-2083f6f0cd51'
17:56:54  Wizard shaft module cannot be loaded
17:56:54  /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:56:54  Traceback (most recent call last):
  File "<string>", line 53, in Initialize
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)

17:58:08
****************************************************************************************************
********** run FEM TestObjectOpen tests ************************************************************
****************************************************************************************************
17:58:20  load old document objects
17:58:20  Cannot create object 'Analysis': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintBearing': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintBodyHeatSource': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintContact': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintDisplacement': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintElectrostaticPotential': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintFixed': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintFlowVelocity': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintFluidBoundary': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintForce': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintGear': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintHeatflux': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintInitialFlowVelocity': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintInitialTemperature': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintPlaneRotation': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintPressure': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintPulley': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintSelfWeight': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintTemperature': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintTie': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ConstraintTransform': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ElementFluid1D': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ElementGeometry1D': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ElementGeometry2D': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ElementRotation1D': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'MaterialMechanicalNonlinear': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'MeshGmsh': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'MeshBoundaryLayer': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'MeshGroup': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'MeshRegion': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'MeshNetgen': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'MeshResult': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'ResultMechanical': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'VtkResult': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'VtkFilterClipRegion': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'VtkFilterClipScalar': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'VtkFilterCutFunction': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'VtkFilterWarp': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'SolverCcxTools': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'SolverCalculix': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'SolverElmer': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Cannot create object 'SolverZ88': (/usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib)
17:58:20  Traceback (most recent call last):
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femguiutils/migrate_gui.py", line 161, in exec_module
    return self.load_module(module)
  File "/usr/lib64/freecad/Mod/Fem/femguiutils/migrate_gui.py", line 208, in load_module
    import femviewprovider.view_material_common
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_material_common.py", line 37, in <module>
    from . import view_base_femconstraint
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_base_femconstraint.py", line 35, in <module>
    from femviewprovider import view_base_femobject
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_base_femobject.py", line 38, in <module>
    import FemGui  # needed to display the icons in TreeView
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
<class 'ImportError'>: /usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib
17:58:20  Traceback (most recent call last):
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femguiutils/migrate_gui.py", line 161, in exec_module
    return self.load_module(module)
  File "/usr/lib64/freecad/Mod/Fem/femguiutils/migrate_gui.py", line 208, in load_module
    import femviewprovider.view_material_common
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_material_common.py", line 37, in <module>
    from . import view_base_femconstraint
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_base_femconstraint.py", line 35, in <module>
    from femviewprovider import view_base_femobject
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_base_femobject.py", line 38, in <module>
    import FemGui  # needed to display the icons in TreeView
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
<class 'ImportError'>: /usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib
17:58:20  Traceback (most recent call last):
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femguiutils/migrate_gui.py", line 161, in exec_module
    return self.load_module(module)
  File "/usr/lib64/freecad/Mod/Fem/femguiutils/migrate_gui.py", line 215, in load_module
    import femviewprovider.view_material_reinforced
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_material_reinforced.py", line 33, in <module>
    from . import view_base_femconstraint
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_base_femconstraint.py", line 35, in <module>
    from femviewprovider import view_base_femobject
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Fem/femviewprovider/view_base_femobject.py", line 38, in <module>
    import FemGui  # needed to display the icons in TreeView
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
<class 'ImportError'>: /usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib
17:58:20  load master head document objects
17:58:20  Traceback (most recent call last):
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
<class 'ImportError'>: /usr/lib64/freecad/lib64/libSMESH.so: undefined symbol: _ZN20TCollection_BasicMapC2Eib
17:58:20
17:58:20  ------------------------------------------------------------------------------
17:58:20    Try importing 'draftguitools.gui_snapper'
17:58:20    /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:58:20  Traceback (most recent call last):
  File "/usr/lib64/freecad/Mod/Draft/drafttests/auxiliary.py", line 46, in import_test
    imported = __import__("{}".format(module))
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftguitools/gui_snapper.py", line 47, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

17:58:21
17:58:21  ------------------------------------------------------------------------------
17:58:21    Try importing 'DraftTools'
17:58:21    /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:58:21  Traceback (most recent call last):
  File "/usr/lib64/freecad/Mod/Draft/drafttests/auxiliary.py", line 46, in import_test
    imported = __import__("{}".format(module))
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/DraftTools.py", line 49, in <module>
    import Draft
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/Draft.py", line 140, in <module>
    from draftfunctions.draftify import draftify
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftfunctions/draftify.py", line 37, in <module>
    import draftmake.make_circle as make_circle
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftmake/make_circle.py", line 33, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

17:58:21
17:58:21  ------------------------------------------------------------------------------
17:58:21    Try importing 'draftguitools.gui_trackers'
17:58:21    /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:58:21  Traceback (most recent call last):
  File "/usr/lib64/freecad/Mod/Draft/drafttests/auxiliary.py", line 46, in import_test
    imported = __import__("{}".format(module))
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftguitools/gui_trackers.py", line 43, in <module>
    import Draft
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/Draft.py", line 140, in <module>
    from draftfunctions.draftify import draftify
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftfunctions/draftify.py", line 37, in <module>
    import draftmake.make_circle as make_circle
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftmake/make_circle.py", line 33, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

17:58:21
17:58:21  ------------------------------------------------------------------------------
17:58:21    Try importing 'DraftGui'
17:58:21    /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:58:21  Traceback (most recent call last):
  File "/usr/lib64/freecad/Mod/Draft/drafttests/auxiliary.py", line 46, in import_test
    imported = __import__("{}".format(module))
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/DraftGui.py", line 47, in <module>
    import Draft
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/Draft.py", line 140, in <module>
    from draftfunctions.draftify import draftify
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftfunctions/draftify.py", line 37, in <module>
    import draftmake.make_circle as make_circle
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftmake/make_circle.py", line 33, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

17:58:21
17:58:21  ------------------------------------------------------------------------------
17:58:21    Try importing 'draftguitools.gui_edit'
17:58:21    /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:58:21  Traceback (most recent call last):
  File "/usr/lib64/freecad/Mod/Draft/drafttests/auxiliary.py", line 46, in import_test
    imported = __import__("{}".format(module))
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftguitools/gui_edit.py", line 45, in <module>
    import draftguitools.gui_trackers as trackers
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftguitools/gui_trackers.py", line 43, in <module>
    import Draft
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/Draft.py", line 140, in <module>
    from draftfunctions.draftify import draftify
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftfunctions/draftify.py", line 37, in <module>
    import draftmake.make_circle as make_circle
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftmake/make_circle.py", line 33, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

17:58:21
17:58:21  ------------------------------------------------------------------------------
17:58:21    Try importing 'DraftLayer'
17:58:21
17:58:21  ------------------------------------------------------------------------------
17:58:21    Try importing 'draftguitools.gui_selectplane'
17:58:21    /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv
17:58:21  Traceback (most recent call last):
  File "/usr/lib64/freecad/Mod/Draft/drafttests/auxiliary.py", line 46, in import_test
    imported = __import__("{}".format(module))
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftguitools/gui_selectplane.py", line 35, in <module>
    import Draft
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/Draft.py", line 140, in <module>
    from draftfunctions.draftify import draftify
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftfunctions/draftify.py", line 37, in <module>
    import draftmake.make_circle as make_circle
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
  File "/usr/lib64/freecad/Mod/Draft/draftmake/make_circle.py", line 33, in <module>
    import Part
  File "/usr/lib/python3.9/site-packages/shiboken2/files.dir/shibokensupport/__feature__.py", line 142, in _import
    return original_import(name, *args, **kwargs)
ImportError: /usr/lib64/freecad/lib64/Part.so: undefined symbol: _ZNK18Adaptor2d_HCurve2d11DynamicTypeEv

17:58:21
17:58:21  ------------------------------------------------------------------------------
17:58:21    Try importing 'WorkingPlane'
17:58:21
17:58:21  ------------------------------------------------------------------------------
17:58:21    Temporary document 'DraftPivy'
17:58:21    Draw cube
17:58:21    Adding cube to the active view scene
17:58:21
17:58:21  ------------------------------------------------------------------------------
17:58:22    Temporary document 'DraftPivy'
17:58:22    Try importing 'pivy.coin'

[liquibyte]

Emerge pulled in over 30 packages just to install this, I don't remember the exact number. In each case the emerge would fail until I "~amd64"'ed it. Given the choice of packages, usually it was either a git pull of 9999 or whatever stable and I always chose the stable version. In one instance I remember, there were two versions and I chose the latest. The freecad I installed was 0.19.2-r3. From the Help>about:

OS: Gentoo/Linux
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.Unknown
Build type: Gentoo
Python version: 3.9.6
Qt version: 5.15.2
Coin version: 4.0.0
OCC version: 7.5.2
Locale: English/United States (en_US)

I can go back and look at what was pulled in if necessary, but this is what I have grouped with freecad in my package.accept_keywords file. I always keep dependencies grouped to try and solve problems like this but I've never had anything happen before on such a grand scale.

=media-gfx/freecad-0.19.2-r3 ~amd64
=dev-libs/OpenNI2-2.2_beta2-r1 ~amd64
=sci-libs/med-4.1.0 ~amd64
=sci-libs/orocos_kdl-1.5.0 ~amd64
=sci-libs/vtk-9.0.1 ~amd64
=sci-libs/kissfft-131.1.0 ~amd64
=app-arch/xz-utils-5.2.5-r1
=media-libs/tiff-4.3.0 ~amd64